快速支持
直接联系认证专家
Targets: 1-23
Speed: 9GB/min. (150MB/sec.) *Actual performance is dependent on HDD transfer rates.
Buffers: Up to 512MB
Supported Formats
All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown.
Quick Copy: copies FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).
Operating Type: Stand-alone, non PC-based operation
Language Support: English, Japanese
LCD Display: Backlit Monochrome LCD Display
LEDs: 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail)
Control Panel: 4 Push Buttons (▲, ▼, OK, ESC)
Copy Modes: Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Skip Bad-Sectors: Manually set (Bad sector) threshold range to skip during copy process
Compare Function: Bit-for-bit data comparison
Sanitization Modes: Quick Erase, Full Erase, DoD Erase, and Secure Erase
PC Monitoring: Real-time status monitoring through PC
Log Report Management
Monitor real-time recordings and Log Reports via PC-Link
Event log reports are generated through the USB port and saved to USB devices
OS Supported: All (Windows, Linux, and other stand-alone systems)
Compatible Interfaces
w/o Adapters: 1.8"/2.5"/3.5” SATA HDDs and SSDs
w/ Adapters: IDE, microSATA, mSATA and M.2
Advanced Formats: Supports MBR, GPT, and Advanced formats.
Power Supply: Selectable Voltage 115V or 230V, 50/60Hz
Temperature Range
Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
Humidity Range
Working Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
