Value+ WT72B Cable Length & Optical Power Meter

Analogue Cable Tracing: Yes

Digitalized Cable Tracing: Yes

Tracing cables connected to ethernet hub with PoE support: Yes

Port Blink Test 10M/100M/1000M: Yes

Voltage Test: Yes

PoE Voltage Polarity Checking: Yes

PoE Voltage measurement: Yes

Crimping Crystal Test: Yes

Intelligent Wiremap indicate good connection, open, shorts and split Pairs: Yes

Continuity: Yes

Analogue Bargraph: Yes

Tracing signal transmission distance : 3Km

Vibration Indication: -

Loudness Adjustable: Yes

Sensitivity Adjustable: Yes

Flashlight: Yes

Remote Identification (Optional) : Max 15 

Operation Indicator: Yes

Visual Fault Locator (Laser Beam Output): Power : 10mW; Flash Frequency : 1Hz / 2Hz / off: Yes

Optical Power Measurement*: 

 Wavelength (nm) : 850, 980, 1300, 1310, 1490, 1550, 1620

 Detector type:  InGaAs

 mW / dBm: Yes

 Accuracy : ±2% 

 Range:  -70.00~6.00 dBm

Low Battery Indication: Yes

Auto Power Off: Yes

Cable Length Measurement: 

 Network Cable : 600m 

 Phone Line : 250m 

 Coaxial Cable : 200m

 Best Accuracy: ±2m / ±2% 

NCV: Yes

Cost Calculation : 100

Multimeter: 

 DC Voltage 600mV~1000V : -

 AC Voltage 600mV~750V : -

 DC Current 600mA~10A : -

 AC Current 600mA~10A: -

 Resistance 600Ω~60MΩ : -

 Frequency 6Hz~60MHz : -

 Capacitance 6nF~60MF: -

 Diode: -

 Continuity: -

 Input Jack Indicators: -

Display : 3.2” 240x320 Dot Matrix

Auto Power Off: Yes

Power by : Main: 3.7V 1500mAH Lithium ion; Receiver: 3.7V 800mAH Lithium ion

Datasheet