For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Why are the boiling points of organic substances, fats, and inorganic substances different?

2026年03月17日 13時50分50秒

The boiling point of each substance is different, depending on its structure and the bonds within its molecule. Understanding this index will help you easily visualize the properties of each group of substances and be more proactive when comparing or using them in practice.

With different material samples, temperature can be monitored using a contact thermometer or an infrared thermometer when a quick surface check is needed.

Boiling point of organic substances

Organic substances are usually of natural or synthetic origin, containing carbon-hydrogen bonds in their composition. This group is very common in everyday life, such as alcohols, sugars, and biological compounds.

In terms of boiling point, most organic substances do not have very high boiling points. However, each type still has its own threshold, depending on its molecular structure.

If we compare them by functional group, we can see the following trend:

COOH (acid) > OH (alcohol, phenol) > COO (ester) > CHO (aldehyde) > O (ether)

This difference stems from the ability to form hydrogen bonds and the polarity of each group.

In addition, the boiling point of organic compounds is also affected by several factors:

- The stronger the hydrogen bonds in a compound, the higher its boiling point.

- Intermolecular hydrogen bonds generally result in higher boiling points than intramolecular bonds.

- The larger the molecular mass, the higher the boiling point.

- More branched chains will have lower boiling points than straight chains.

For example, CH3COOH has a higher boiling point than HCOOH due to its larger molecular weight.

Boiling point of fats

Fats are also a type of organic compound, but they have a longer and more complex molecular structure, so their boiling points are usually higher.

The boiling point varies depending on the type of fat:

- Monounsaturated fats like olive oil and peanut oil usually boil above 100°C, and can reach around 240°C.

- Polyunsaturated fats like omega-3 and omega-6 usually boil above 120°C.

- Saturated fats, such as animal fat, typically boil above 130°C.

- Trans fats, such as margarine, can boil at around 150°C.

In general, fats have higher boiling points than water and much higher than many simple organic compounds. This is directly related to molecular size and the ability of molecules to bond together.

Boiling point of inorganic substances

Inorganic substances are compounds that do not contain carbon in their structure, except for some special cases such as CO, CO₂, or carbonate salts.

Compared to organic substances, inorganic substances generally have much higher boiling points. This is due to the strong ionic or covalent bonds, which require a large amount of energy to break.

The difference is clearly illustrated by a familiar example. Ethanol (C₂H₅OH) only boils at around 78.3°C, while an inorganic compound like CaCl₂ can reach thousands of degrees Celsius before turning into vapor.

The boiling points of organic substances, fats, and inorganic substances differ significantly, mainly due to their molecular structure and type of bonding. Organic substances generally have lower boiling points, fats have higher boiling points due to their larger molecules, while inorganic substances usually have very high boiling points.

相关新闻

SMEMA standard for PCB conveyors
2026年11月16日 14時00分39秒

SMEMA was developed to address this specific point; consequently, conveyors, loaders, and unloaders all include an SMEMA port in their technical specifications

Reduce scratches and drops of PCB boards during transfer between stages in an SMT production line
2026年11月16日 10時42分38秒

In a well-functioning SMT line, when QC detects defects at the end of the process, the immediate assumption is often that the issue lies with the solder paste printer or the component placement machine. However, upon closer investigation, there are certain types of defects that cannot be attributed to any single specific stage. Read the article below to learn more!

Homes on busy streets: How to measure fine particulate matter and exhaust fumes entering your living room
2026年11月16日 09時42分31秒

Living in a house facing a main road is particularly frustrating: you might wipe the tables until they’re spotless in the morning, only to find them covered in a layer of dust by the afternoon. Even with the doors tightly shut and the curtains drawn, the house still feels stuffy by evening—permeated by the faint, lingering presence of vehicle exhaust. While regular dust can be swept away, fine particulate matter the kind you can’t even see silently seeps in through the gaps around your doors and windows. So, before you rush to spend money on an air purifier or weather-stripping, take a moment to check the current air quality inside your home and identify exactly where the pollutants are entering

When Should You Use Stick, TIG, or MIG Welding?
2026年11月16日 08時47分55秒

Stick welding uses a coated electrode without shielding gas; TIG prioritizes clean, precise welds; MIG supports continuous wire feeding and easier automation.

What Are 10 Common MIG Welding Problems and Fixes?
2026年11月16日 08時47分05秒

Common MIG welding faults often trace to shielding gas, polarity, wire feeding, torch condition, joint preparation, welding settings, or cable connections. Match the symptom to its likely checks before changing parts.

获取优惠更新

获取专属批量折扣、批发价格更新和新产品通知,直接发送到您的邮箱。

订阅即表示您同意我们的服务条款和隐私政策。

快速支持

直接联系认证专家