快速支持
直接联系认证专家
Input frequency range: 0.01-30 MHz (direct input section), 30-3000 MHz (heterodyne section), separate SMA inputs, paths internally switchable
Tuning resolution: 1 MHz
Output frequency: 70 MHz
Output bandwidth: 22 MHz
Gain: 30 dB typ.
Noise figure: 15 dB typ.
Internal spurii: less than -100 dBm of eq. antenna input except for 30 MHz reference clock at typ. -70 dBm and its multiples at less than -90 dBm typ.
IF rejection: >40 dB typ.
Image rejection: >40 dB typ.
Maximum input level: +10 dBm
Attenuation control: 0-20 dB in 1 dB steps (30 to 3000 MHz path only)
IP3: -3 dBm @ 1060 MHz with interfering signals at 1040 MHz and 1050 MHz
Input impedance: 50 ohm (SMA connector)
Output impedance: 50 ohm (SMA connector)
Amplitude ripple: 3 dB typ.
Phase ripple: 3 degrees typ.
Phase adjustment range: 60 degrees
Phase adjustment resolution: 0.25 degrees
Channel-to-channel isolation; 40 dB typ.
Total phase noise: -86 dBc/Hz @ 10 kHz offset (30 MHz internal ref.)
Tuning speed: 5 ms typ.
Frequency stability: 1 ppm (or external reference)
External reference: 10 MHz or 30 MHz (-5 dBm to +15 dBm)
LO1: 3950 to 6920 MHz (accessible to the user at 0 dBm +/- 5 dB via SMA LO1 Out)
LO2: 3850 or 3990 MHz (accessible to the user at +5 dBm via SMA LO2 Out)
IF1: 3920 MHz (accessible to the user with 0 dB gain, 30 MHz BW, SMA output)
Phase-coherent capability: Inbuilt two-way splitters on LO1 and LO2 for two-channel phase-coherent operation
HF Mode Preselector: Switchable AM BCB filter
HF Mode Preamplifier: 20 dB switchable
HF Mode Antialiasing Filter: 30 MHz LPF
Power consumption: 6 W typ.
Control interface: USB 2.0 or RS-232C
Dimensions: 91 x 68 x 47 mm (3.6" x 2.7" x 1.9")
Weight: 375 g (13.2 oz)
Operating temperature: -10º to +60º C
Humidity: 20-90% non-condensing
