快速支持
直接联系认证专家
1. Combustion chamber Dimensions: 2,500 (W) × 1,500 (D) × 3,000 (H) mm; Stainless steel is used for chamber wall
2. Internal tooling are all made of stainless steel;
3. Burner cross-sectional area at least: 80mm × 350mm, a total of six units. The burner units could be adjustable according to the sample.
4. Exhaust pipe size Ø400 x 1,000 (L) mm
5. Temperature measuring range: 0 ~ 120 ºC ± 2 ºC
6. Working pressure: 0.01 ~ 1MPa, the maximum test pressure 1.0MPa
7. DPT can accurately test the hose pressure, test accuracy: ± 0.01 MPa
8. Timing: 0 ~ 9999 ± 0.1 S
9. The pump power: 1.5KW, can provide up to 10kgf / cm2 of water pressure
10. Heating power: 15KW
11. Flame temperature range: 800 ºC ± 50 ºC
12. Use laboratory Labview system to design a simple graphical interface (GUI) and easy operating environment
13. Through automated real-time recording and saving control logic test data to facilitate comparison test repeatability
14. Provide data analysis and test report formats to meet customer requirements
15. Test chamber is stainless steel, heat and corrosion
16. Burner position can be moved to meet different types of hose fittings and valves test
17. MFC can automatically control the gas and air flow test range: 0-100L / min
18. Electronic flow meter can test hoses and valves
19. Size: 2,500(W)×1,500(D)×3,000(H)mm
20. Power supply: AC 220V, 50/60Hz, 15A
21. Weight: 1,500kg
22. Instructions: Available
23. Exhaust: Minimum 15m2/min
24. Tool: Compressed air, computers, propane gas
