Advanced Energy UltraVolt 35A Standard-Size Power Supply (0~35000VDC)

Input (12V; 24V):

- Voltage Range: Full Power: +11 ~ 16VDC; +23 ~ 30VDC

- Voltage Range: Derated Power Range: +9 ~ 32VDC

- Current:

Standby / Disable: < 30mA

No Load, Max Eout: < 0.35A

Max Load, Max Eout: ≈ 800mA; ≈ 1800mA

- AC Ripple Current: Nominal Input, Full Load, < 80mA p-p

Output

- Voltage range: 0 ~ 35000VDC

- Power: Nominal Input, Max Eout: 4, 15, 30W

- Current: Iout Entire Output Voltage Range: 0.11, 0.42, 0.86mA

- Current Scale Factor: Full Load, 0.158, 0.179, 0.184mA/V

- Voltage Monitor Scaling: 1000:1 ± 2% into 10 MΩ

- Ripple: Full Load, Max Eout: 0.025, 0.040, 0.075%V p-p

- Ripple with -F-M Option*: Full Load, Max Eout, 300 pF Bypass Cap: 0.016, 0.034, 0.040%V p-p

- Dynamic Load Regulation: ½ to Full Load, Max Eout per 0.1mA: < 10.0Vpk

- Line Regulation: Nom. Input, Max Eout, Full Power: < 0.01 %

- Static Load Regulation: No Load to Full Load, Max Eout: < 0.01%

- Stability: 30 Min. warmup, per 8 hr/ Per Day: < 0.01%/< 0.02%

Programming & Controls

- Input Impedance: Nominal Input

+ output models 1.1 MΩ ~ GND, - output models 1.1 MΩ ~ +5 Vref

- Adjust Resistance: Typical Potentiometer Values:

10 ~ 100 K (Pot. across Vref. and signal GND, wiper to adjust)

- Adjust Logic: 0 ~ +5 for +Out, +5 ~ 0 for - Out

+4.64 VDC for +output or +0.36 for -output = nominal Eout

- Output Voltage & Impedance: T=+25°C

+ 5.00 VDC ± 2%, Zout = 464 Ω ± 1%

- Enable/Disable: 0 ~ +0.5 disable, +2.4 ~ 32 enable (default = enable)

Environmental:

- Operating: Full Load, Max Eout, Case Temp.

Standard: -40 ~ +65°C

-25PPM Option: +10 ~ +45°C

- Coefficient Over the Specified Temperature:

Standard: ±50PPM/°C

-25PPM Option: +25PPM/°C

- Thermal Shock: Mil-Std 810, Method 503-4, Proc. II: -40 ~ +65°C

- Storage: Non-Operating, Case Temp.: -55 ~ +105°C

- Humidity All Conditions, Standard Package: 0 ~ 95%, non-condensing

- Altitude Standard Package, All Conditions: Sea level through vacuum (Vacuum may require -P2 option. Contact factory for details.)

- Shock: Mil-Std-810, Method 516.5, Proc. IV: 20Gs (standard), 40Gs (-C option)

- Vibration: Mil-Std-810, Method 514.5, Fig.14.5C-3: 10Gs (standard), 20Gs (-C option)

- Volume: 207.46cm3, 12.66in3

- Weight: 425.24g, 15.00oz