Elcometer A456CFBI2 涂层测厚仪（0-5mm，黑色金属）
制造商: ELCOMETER Model: A456CFBI2 - 报价要求
- 报价要求
- 联系
Range: 0-5mm
Resolution: 1μm: 0-1mm; 10μm: 1-5mm
Accuracy: ±1-3% or ±20μm
Ferrous Integral
Calibration memory type; gauge (g) or gauge & batch (gb): g
Gauge memory: last 5
Data output: USB; to computer
Tough, impact, water & dust resistant; equivalent to IP64
Display information: 2.4 inch (6cm) QVGA colour TFT display, 320 x 240 pixels
Battery type: 2 x AA dry cell batteries, rechargeable batteries can also be used
Battery life: ~24 hours of continuous use at 1 reading per second5
Gauge dimensions (h x w x d): 141 x 73 x 37mm
Gauge weight: 161g including supplied batteries
Operating temperature: -10 to 50°C
Packing list: Elcometer 456 gauge, calibration foils (integrals only), protective case, 2 x AA batteries, operating instructions
The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.
Elcometer 456 Coating Thickness Gauge
Technical Specification
|
Integral Model Options |
|||||||||
|
Scale 1 |
Range: 0-1500μm (0-60mils) |
Accuracy*: ±1-3% or ±2.5μm (±0.1mil) |
|||||||
|
|
Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils) |
||||||||
|
|
Model B |
Model S |
Model T |
C |
|||||
|
Elcometer 456 Ferrous Integral |
A456CFBI1 |
A456CFSI1 |
A456CFTI1 |
● |
|||||
|
Elcometer 456 Non-Ferrous Integral |
A456CNBI1 |
See separate gauges with N2 PINIP™ Probe |
See separate gauges with N2 PINIP™ Probe |
● |
|||||
|
Elcometer 456 Dual FNF Integral |
A456CFNFBI1 |
A456CFNFSI1 |
A456CFNFTI1 |
● |
|||||
|
|
|
|
|
|
|||||
|
Scale 2 |
Range: 0-5mm (0-200mils) |
Accuracy*: ±1-3% or ±20μm (±1.0mil) |
|||||||
|
|
Resolution: 1μm: 0-1mm; 10μm: 1-5mm (0.1mil: 0-50mils; 1mil: 50-200mils) |
||||||||
|
For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance |
|||||||||
|
|
Model B |
Model S |
Model T |
C |
|||||
|
Elcometer 456 Ferrous Integral |
A456CFBI2 |
See separate gauges with F2 PINIP™ Probe |
See separate gauges with F2 PINIP™ Probe |
● |
|||||
|
|
|
|
|
|
|||||
|
Scale 3 |
Range: 0-13mm (0-500mils) |
Accuracy*: ±1-3% or ±50μm (±2.0mils) |
|||||||
|
|
Resolution: 1μm: 0-2mm; 10μm: 2-13mm (0.1mil: 0-100mils; 1mil: 100-500mils) |
||||||||
|
|
Model B |
Model S |
Model T |
C |
|||||
|
Elcometer 456 Ferrous Integral |
A456CFBI3 |
See separate gauges with F3 PINIP™ Probe |
See separate gauges with F3 PINIP™ Probe |
● |
|||||
|
|
|
|
|
|
|||||
|
Separate Model Options |
|
|
|
|
|||||
|
|
Model B |
<p align="cente | |||||||
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化
