Finna N8 无损快速水分检测仪

Application: measure the moisture content of materials that are restricted or designed for flat, curved, smooth or rough surfaces such as cones or beams, rolls or stacks of fabrics, rolls or overlays of paper or paperboard, carpets, etc.

Measuring range: 0-35%

Handheld, using rechargeable batteries

Direct Measurement

Method of measurement: radio frequency

Display: analog

Power supply: 220VAC

Detail

Model N8: Narrow Materials Moisture Meter

The Model N8 is designed for flat, curved, smooth, or rough surfaces such as cones or beams of yarn, rolls or stacks of cloth, rolls or stacks of paper or paperboard, carpets, tiles, etc. The electrode covers an area of 1-1/4 x 3 inches and penetrates ½ inch into the product. Complete with Rechargeable Battery, Carrying Case and Operating Instructions Book.

Product Description

The Model N8 narrow materials moisture meter permits nondestructive tests for moisture content on most flat, curved, solid or semi-solid materials.

The N8 is ruggedly constructed, easy-to-use instrument with intergrated solid-state circuitry for reliability and long battery life. Its light weight design includes a molded handle with a spring-loaded switch bar that permits testing with either hand. Finna Group’s patented electrode designs project an RF field into the sample. The RF signal loss due to the presence of moisture is measured and displayed directly as “Moisture Content Percentage”.

The N8 is equipped with four sensitivity settings to provide moisture measurement in the range of 0-35% on most materials. The Zero Suppression feature provides scale overlap in all ranges from 0% to high moisture content. Built-in electrical standards for each range allows for calibration checks at any time by turning a switch, and a built-in adjustment trimmer for each range permits calibration to be reset if necessary. A battery regulator circuit provides constant calibration as the battery discharges.

Model N8: Narrow Materials Moisture Meter Features
  • Designed for materials with a minimum width of 1-1/4″ (3.2 cm) such as narrow cones of yarn or thread, small spools of paper yarn and narrow papers.
  • The electrode covers an area of 1-1/4″ x 3″ (3.2 cm x 7.6 cm).
  • Electrode Penetration: 1/2″ (1.3 cm).
  • Sample calibration curves available for a wide range of materials.

Additional Information

Process

Handheld

Pin Feature

Pinless

Contact Feature

Contact

Measurement Method

Radio Frequency

Reading Feature

Analog

Voltage

115 VAC, 220 VAC

CATALOG


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化