GYS PROMIG 400-4S DUO DV MIG/MAG 焊接机 (230/400V, 3ph, 40-350 A, wire feeder)

Three phase «Synergic» 350 Amp MIG welder with 4 drive rollers. Ideal for maintenance and industrial production work. Increase productivity - With two individual wire feeders it enables two different wire types/sizes are fitted at the same time thus avoiding time consuming wire and gas bottle changes.

SIMPLIFY YOUR WORK:

2 wire feeders: One located inside the power generator and one inside the separate wire feed unit with a 10 m connection cable.

2 torches: Automatic selection of the internal or external wire feeder and welding para meters (including gas type) upon pressing the trigger.

2 gas controls: Two solenoid valves enable different gas types to be selected just by pressing the trigger e.g Argon for aluminium used with the main machine and Argon/CO2 for steel on the separate wire feed unit.

2x faster : Eliminates the need to change MIG tips, drive rollers, torch liner and MIG wire reels when changing jobs.

2x more versatile: One machine can be setup to weld Steel/Aluminium, Steel/ Stainless or Aluminium/Stainless.

2 MODES : SYNERGIC OR MANUAL

GYS experience integrated in more than 1000 parameters managed by microprocessor.

- Synergic mode : Optimum results without adjusting the wire speed :

• Select wire type

• Select wire size

• Select the power (refer to table on the front of the machine)

- Manual mode : Manual adjustement option of the wire speed and power

Specifications:

Welding current: 230 V/400 V, 3 ph, 50/60 Hz

Power supply: 40A (230V) / 25A (400V)

Welding current range: 40-350 A

Duty cycle (environment temp. at 40°C):

   350 A / 31.5 V @ 35%

   270 A / 27.5 V @ 60%

   220 A / 25 V @ 100% 

Wire feed speed: 1 - 20 m/min- 4 rollers (2 motors)

Intergrated wire feeder: TF-4RN (option)

Supported wire reels: Ø200-300 mm

Wire diameter:

    Cored wire: 0.9 - 1.6 mm

    Steel, inox: 0.8 - 1.2 mm

    Aluminum: 1.0 - 1.2 mm

Voltage level: 14

No-load voltage: 17/41.5 V

Protection level: IP 21 

Dimensions (L x w x h): 89 x 49 x 88 cm

Weight: 109 kg

Standard: IEC 60974-1/5/10 A

Original equipment (roller): 1.0/1.2 - B (Steel, inox)

Included accessories:

Air Cooled Wire Feeder: TF-4RN: 061699

Roller type B (x2) - Ø1.0 / 1.2 steel/ inox

Roller type B Ø1.0/1.2 - aluminum

Earth cable 400 A 4 m/50 mm²

Connection cable 10m: 034860

Torch MIG/MAG GRIP- steel (350A-4m): 040946

Torch MIG/MAG GRIP- aluminum (350A-3m): 040731

Details

Video

Manual


Datasheet

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化