| Functions: |
| * It applies microprocessor-based technology and functions as automatic temperature compensation, auto-calibration, auto measuring range switch. |
| * The user can calibrate the sensor constant or TDS conversion coefficient. Also, the instrument supports two-point calibration. |
| * 5.7 inch large touch screen, friendly English language interface and easy use. |
| * It follows GLP practice |
| * The stored data can be displayed by graphics and can be viewed, printed and deleted. |
| * It allows the user to review current measuring date and the last calibration data. |
| * It contains 3 kinds of measuring modes: Continuous measurement, timing measurement and balance measurement which can meet different measuring requirements. |
| * It has RS-232 and USB ports. If matched with data collecting software, it can be communicated with PC. |
| Spec | PHSJ-318 |
| Instrument Degree | 0.5 Degree |
| Measuring Parameters | Conductivity, Resistivity, TDS,Salinity, Temperature |
| Measure Range | Conductivity: 0.055μS/cm~199.9mS/cm; |
| Resistivity: 5.00Ω.cm~18.25 MΩ.cm; | |
| TDS: 0.000 mg/L~100g/L | |
| Salinity: (0.00~8.00)%; | |
| Temperature: (-5.0~135.0)°C | |
| Resolution | Conductivity:0.001μS/cm, 0.1ｍS/cm |
| Resistivity: 0.1Ω.cm | |
| TDS:0.001 mg/L | |
| Salinity:0.01%; | |
| Temperature:0.1°C | |
| Accuracy | Conductivity:±0.5%FS |
| Resistivity: ±0.5%FS | |
| TDS:±0.5%FS | |
| Salinity:±0.1% | |
| Temperature:±0.3°C±1 bit | |
| Instrument Function | Manual/Auto Temperature compensation range: Manual(-5.00~135.0) °C |
| Two points calibration | |
| Measure Mode: continue measure, timing measure and balance measure. | |
| Data storage: 1500 pcs picture | |
| Port: RS-232,USB | |
| Software: REX date collection software | |
| Power | 220V or 110V |
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化
