Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Pressure: 1.0-4.0 Kgf/cm²
Flow Procedure**: PF+AC+RO+DI
Ion rejection rate: 96%-99%
Organic rejection rate: >99% (when MW>200 Dalton)
Particles and bacteria rejection rate: >99%
Bacteria: <0.1 cfu/ml
Output(25°C)****: 30 L/hrs
Pure water outlet: RO and deionized water
DimensionLxWxH: 410×400×420 mm
Weight: 20 kg
Standard configuration: Main body (Including 1 set of cartridges)+ built-in 10 liters tank + TDS pen+ accessory bag
Power Consumption (W): 72 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.
**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange.
***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Resistivity: >13-17.5 MΩ.cm
Particle(>0.2µm): Particle (>0.2 µm)<1/ml (with terminal filter)