Labstac WD123 去离子水系统

Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: PF+AC+RO+DI

Ion rejection rate: 96%-99% 

Organic rejection rate: >99% (when MW>200 Dalton)

Particles and bacteria rejection rate: >99%

Output(25°C)****: 30 L/hrs

Pure water outlet: RO and deionized water

Water Quality Monitor: Portable TDS/conductivity test pen + on-line resistivity monitor

DimensionLxWxH: 410×220×420 mm

Weight: 20 kg

Standard configuration: Main body (Including 1 set of cartridges) + 15 liters tank+ TDS pen +accessory bag

Power Consumption (W): 72 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. 

**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, TF:terminal microfiltration. 

***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

Resistivity: >15-18.2 MΩ.cm

Conductivity: 0.055-0.067µs/cm

Particle(>0.2µm): <1/ml

Flow rate: 2.0 L/min 

Detail

Datasheet


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化