emin

Lecroy VBA104Xi-A 示波器(1Ghz,5GS / s,4CH)

  • 制造商: LECROY
    Model: VBA104Xi-A
    • 报价要求 报价要求
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      

Analog Bandwidth:1 GHz
Single-Shot Sample Rate/Ch:5GS/s
Input Channels:4
Color 10.4" flat-panel TFT-LCD with high resolution touch screen

Chi tiết

 

Datasheet

Request Demo

The Vehicle Bus Analyzer Speaks Your Language

The Vehicle Bus Analyzer decodes CAN serial data into Symbolic (application layer ) text directly on the oscilloscope display. For the first time, an engineer has both the full range of CAN protocol stack information—symbolic, hex, and electrical signal—and the ability to view additional in-circuit electrical signals (sensors and actuators, voltage levels, transients, etc.) that influence the CAN bus. In addition, up to four different CAN buses can be decoded at one time.Standard and specialized oscilloscope tools can be used to validate and debug designs.

Features
  • CAN symbolic (Application Layer) decode of up to 4 CAN buses
  • CAN triggering with setup in symbolic format
  • CAN digital date extraction with symbolic format setup and plot data as an analog signal
  • CAN automated timing measurements
  • Compatible with CAN DBC database format
  • Includes CANbus TDM, FlexRay TDP, and LINbus TD solutions
  • FlexRay, Trigger, Decode, and Physical Layer testing (version 2.1)
  • LIN Trigger and Decode supported for 1.3, 2.x, J2602 versions
  • FlexRay eye diagram mask testing with error location
  • FlexRay physical layer measurement para meters for propagation delay, asymmetric delay, truncation and jitter
  • Capture thousands (seconds) of CAN, FlexRay and LINbus messages with up to 25 Mpts of memory
Eliminate the Barriers to Fast Debug

Direct symbolic decoding and triggering allows fast and intuitive understanding of events.Simply load your existing DBC database file into the oscilloscope (no re-entry of data is required); capture CAN message traffic; and all electrical (signal), protocol (hex), and symbolic (application) layer information is quickly displayed on the oscilloscope screen. Use standard oscilloscope and specialized Vehicle Bus Analyzer tools to find rare events, automatically measure and statistically analyze event timing, and graph/plot information, including extracted CAN message data.

The Single Tool Enhances Productivity

The VBA concentrates all your information in one place. Timing measurements across gateways are now possible. Under standing is fast, intuitive, and in a familiar format. Complete, time-correlated understanding of all ECU or circuit behaviors is simple. Time-consuming workarounds are a thing of the past.

Unique Measurement Tools

The VBA can make many measurements not possible with other instruments. Aside from timing measurements, the VBA can also extract CAN digital data from a CAN message stream, graphically plot that data as an analog signal on the oscilloscope display, and compare it to other electrical signals. Here, information on the steering angle and steering angle rate of change is extracted from the CAN message acquisition, rescaled to decimal values, and plotted as a time-correlated "Track" on the VBA display.

Vehicle Bus Analyzer Software Capabilities
  • Symbolic (application layer) decode of up to 4 separate CAN bus
  • Symbolic CAN trigger setup
  • Hexadecimal decode and trigger setup for CAN, FlexRay and LINbus.
  • Binary trigger setup
  • Automated timing measurements, including capability to measure timing across gateways:
    • CAN message to Analog signal
    • Analog signal to CAN message
    • CAN message to CAN message
  • Bus Load % measurements (up to 2 billion events)
  • CAN digital data extraction and display in analog form in scaled decimal values
  • CAN message bit rate calculation
  • Statistical calculations of many measurements
  • Histogram (graphical) display of statistical data, including timing measurements
  • Trend and Track plots of extracted CAN data
  • Persistence trace, mean, and sigma functionality
  • Complete set of Jitter and Timing (@level) parameters
  • Supports for 2.5, 5, and 10 Mb/s FlexRay signals
  • Physical layer measurement parameters for propagation delay, asymmetric delay, truncation and jitter for FlexRay
  • Vertical System

    Analog Bandwidth @ 50 Ω (-3 dB) 1 GHz
    Rise Time (typical) 400 ps
    Input Connector ProBus/BNC
    Input Channels 4
    Bandwidth Limiters 20 MHz; 200 MHz
    Input Impedance 1 MΩ || 20 pF or 50 Ω
    Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
    Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
    Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
    Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
    DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
    Offset Range ±400 mv@2–4.95 mv/div, ±1 V@5–99 mv/div, ±10 V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div; 1 M Ω: ±400 mv @ 2–4.95 mv/div, ±1 V @ 5–99 mv/div, ±10V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div
     

    Horizontal System

    Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
    Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
    Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
    Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
    Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
    External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
    Roll Mode User selectable at = 500 ms/div and = 100 kS/s
     

    Acquisition System

    Single-Shot Sample Rate/Ch 5 GS/s
    Random Interleaved Sampling (RIS) 200 GS/s
    Maximum Trigger Rate 1,250,000 waveforms/second
    Intersegment Time 800 ns
    Interleaved Sample Rate (2 Ch) 10 GS/s
    RIS Mode User selectable from 100 ps/div to 10 ns/div
    Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
    Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
    Sequence Time Stamp Resolution 1 ns
     

    Acquisition Processing

    Averaging Summed and continuous averaging to 1 million sweeps
    Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
    Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
    Interpolation Linear or (Sinx)/x
    Time Resolution (min, Single-shot) 100 ps (10 GS/s)
     

    Triggering System

    Trigger Modes Normal, Auto, Single, Stop
    Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
    Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
    Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
    Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
    Hold-off by Time or Events 1 ns to 20 s or 1 to 1,000,000,000 events
    Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
    Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 1 GHz 1 div @ < 200 MHz
    Max. Trigger Frequency, SMART Trigger 1 GHz @ = 10 mV
     

    Basic Triggers

    Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
    TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
     

    SMART Triggers

    State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
    Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
    Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
     

    SMART Triggers with Exclusion Technology

    Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
    Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
    Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
    Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
    Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
    Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
     

    Color Waveform Display

    Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
    Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
    Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
    Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
    Waveform Representation Sample dots joined or dots only in real-time mode
     

    Internal Waveform Memory

    Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
     

    LeCroy WaveStream™ Fast Viewing Mode

    Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
    Number of Channels up to 4 simultaneously
    Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
    Waveforms/second (continuous) up to 8000 waveforms/second
    Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
     

    Zoom Expansion Traces

    Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
     

    Setup Storage

    Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
     

    Interface

    Remote Control Via Windows Automation, or via LeCroy Remote Command Set
    GPIB Port (optional) Supports IEEE – 488.2
    Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
    USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
    External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
    Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
     

    Auxiliary Input

    Signal Types Selected from External Trigger or External Clock input on front panel
    Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
    Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
     

    Auxiliary Output

    Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
    Output Signal TTL, ˜3.3 V
    Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
     

    Automatic Setup

    Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
    Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
     

    General

    Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
    Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
     

    Probes

    Probes One PP007 per channel standard; Optional passive and active probes available.
    Probe System: ProBus Automatically detects and supports a variety of compatible probes.
    Scale Factors Automatically or manually selected, depending on probe used
     

    Environmental and Safety

    Temperature (Operating) +5 °C to +40 °C
    Temperature (Non-Operating) -20 °C to +60 °C
    Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
    Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
    Altitude (Operating) Operating Up to 2,000 m
    Altitude (Non-Operating) Non-Operating 12,190 m
     

    Physical Dimensions

    Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
    Net Weight 6.95 kg. (15.5 lbs.)
     

    Certifications

    Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
     

    Warranty and Service

       
     

 

Option

Serial Data Compliance

QPHY-BroadR-Reach
QualiPHY Enabled BroadR-Reach Compliance Software Option. Requires either SDA2 or JTA2
QPHY-ENET
QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option
QPHY-USB
QualiPHY Enabled USB 2.0 Compliance Software Option
ENET-2ADA-BNCSMA
Adapter Set- 2 BNC/M to SMA/F
ENET-2CAB-SMA018
Cable Set- 2 SMA-SMA 18 inches
ENET-2CAB-SMA036
Cable Set- 2 SMA-SMA 36 inches
ET-PMT
Electrical Telecom Pulse Mask Software;
WRXi-SDM
Serial Data Mask Software Package for WaveRunner Xi Series

Serial Trigger and Decode

WRXi-USB2-HSICbus D
USB 2.0 HSIC Decode Option
CANbus TD
CANbus TD Trigger and Decode Option
CANbus TDM
CAN Bus Trigger, Decode, and Measure/Graph option
CANbus TD 5LIC
CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes
WRXi-NRZbus D
NRZ Bus Decode Option for WaveRunner Xi
WRXi-Manchesterbus D
Manchester Bus Decode Option for WaveRunner Xi
WRXi-ENETbus D
ENET Bus Decode Option for WaveRunner Xi
CANbus TDM-5LIC
CAN Bus Trigger, Decode, and Measure/Graph option with 1 Hardware Kit and 5 SW Licenses
TC1041-OPTO
CAN 1041 Opto-isolated High-speed Trigger Coupler
TC1050-OPTO
CAN 1050 Opto-isolated High-speed Trigger Coupler
TC1054-OPTO
CAN 1054 Opto-isolated Low-speed Trigger Coupler
TC251-OPTO
CAN 251 Opto-isolated High-speed Trigger Coupler (one is included with CANbus TD)
TC10011-OPTO
CAN B10011S Opto-isolated Truck and Bus Trigger Coupler
WRXi-1553 TD
MIL-STD-1553 Trigger and decode option for WaveRunner Xi
WRXi-ARINC429bus DSymbolic
ARINC 429 Bus Symbolic Decode option for WaveRunner Xi/Xi-A
WRXi-AudioBus TD
AudioBus trigger and decode for WaveRunner Xi
WRXi-AudioBus TDG
AudioBus trigger, decode, and graph for WaveRunner Xi
WRXi-DigRF3Gbus D
DigRF 3G Bus Decode option for WaveRunner Xi/Xi-A
WRXi-DPHYbus D
D-PHY Bus Decode option for WaveRuner Xi/Xi-A
WRXI-I2CBUS TD
I2C Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes
WRXi-PROTObus MAG
Serial Debug Toolkit - Measure Analyze Graph for WaveRunner Xi/Xi-ACompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553
WRXi-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WaveRunner Xi/Xi-ACompatible with USB2bus D, SATAbus D, SASbus D, FCbus D
WRXi-SATAbus D
SATA Decode option for WaveRunner Xi/Xi-ASupports SATA Gen 1, 2, and 3.
WRXI-SPIBUS TD
SPI Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes
WRXi-UART-RS232BUS TD
UART and RS232 Bus Trigger and Decode Option for WaveRunner Xi Oscilloscopes
WRXi-USB2bus D
USB 2.0 Bus Decode option for WaveRunner Xi/Xi-A
WRXI-SENTbus D
SENT Bus Decode Option for WaveRunner Xi

Jitter Analysis Software

WRXi-JTA2
Jitter and Timing Analysis Software Package for WaveRunner Xi Series

Miscellaneous

WRXi-SOFTCASE
WRXi Soft Carrying Case
WRXi-HARDCASE
WRXi Hard Carrying Case
WRXi-KYBD
WRXi Keyboard Accessory
WRXi-RACK
WRXi Rack Mount Accessory Kit
WRXi-MS-CLAMP
WRXi Clamp Mounting Stand

Other Software Options

WRXi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series
WRXi-EMC
EMC Pulse Parameter Package
WRXi-STAT
Histogram and Statistical Analysis Pkg.
WRXi-XMATH
Advanced Math Software Package for WaveRunner Xi Series
WRXi-XDEV
Advanced Customization Software Package for WaveRunner Xi Series
WRXi-XMAP
WRXi Master Analysis Package (XMATH+XDEV+JTA2)
WRXi-XWAV
WRXi Intermediate Math Package
WRXi-XVAP
Value Analysis Software Package (includes XWAV and JTA2) for WaveRunner Xi Series
WRXi-XWEB
Processing Web Editor Software Package for Functions and Parameters for WaveRunner Xi Series

Data Storage Software

WRXi-AORM
Advanced Options Record Measurement Package
WRXi-DDM2
Disk Drive Measurement Software Package for WaveRunner Xi Series

Remote Control/Network Options

USB2-GPIB
External USB 2.0 to GPIB IEEE 488.2 adapter

Power Analysis Software

WRXi-PWR
Power Analysis Option for WR Xi

Digital Filtering Software

WRXi-DFP2
Digital Filter Software Package for WaveRunner Xi Series

Mixed Signal Solutions

MS-500
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option
MS-250
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Mixed Signal Accessories

PK400-1
Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads
PK400-2
Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads
PK400-3
Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads
MSO-MICTOR
36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)
MSO-3M
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)
MSO-DLS-36
16" Digital Lead Set, D18-D35
MSO-MICTOR-SHROUD
Shroud for MSO-MICTOR connector, Kit of 3

Serial Data Test Fixtures

TF-ENET-B
10/100/1000BaseT Ethernet Test Fixture
TF-USB-B
USB 2.0 Compliance Test Fixture

 


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会