emin

LeCroy VBA64Xi-A 示波器(600Ghz,5GS / s,4CH)

  • 制造商: LECROY
    Model: VBA64Xi-A
    • 报价要求 报价要求
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      

Analog Bandwidth:600 GHz
Single-Shot Sample Rate/Ch:5GS/s
Input Channels:4
Color 10.4" flat-panel TFT-LCD with high resolution touch screen

Chi tiết
 
The Vehicle Bus Analyzer Speaks Your Language

The Vehicle Bus Analyzer decodes CAN serial data into Symbolic (application layer ) text directly on the oscilloscope display. For the first time, an engineer has both the full range of CAN protocol stack information—symbolic, hex, and electrical signal—and the ability to view additional in-circuit electrical signals (sensors and actuators, voltage levels, transients, etc.) that influence the CAN bus. In addition, up to four different CAN buses can be decoded at one time.Standard and specialized oscilloscope tools can be used to validate and debug designs.

Features
  • CAN symbolic (Application Layer) decode of up to 4 CAN buses
  • CAN triggering with setup in symbolic format
  • CAN digital date extraction with symbolic format setup and plot data as an analog signal
  • CAN automated timing measurements
  • Compatible with CAN DBC database format
  • Includes CANbus TDM, FlexRay TDP, and LINbus TD solutions
  • FlexRay, Trigger, Decode, and Physical Layer testing (version 2.1)
  • LIN Trigger and Decode supported for 1.3, 2.x, J2602 versions
  • FlexRay eye diagram mask testing with error location
  • FlexRay physical layer measurement para meters for propagation delay, asymmetric delay, truncation and jitter
  • Capture thousands (seconds) of CAN, FlexRay and LINbus messages with up to 25 Mpts of memory
Eliminate the Barriers to Fast Debug

Direct symbolic decoding and triggering allows fast and intuitive understanding of events.Simply load your existing DBC database file into the oscilloscope (no re-entry of data is required); capture CAN message traffic; and all electrical (signal), protocol (hex), and symbolic (application) layer information is quickly displayed on the oscilloscope screen. Use standard oscilloscope and specialized Vehicle Bus Analyzer tools to find rare events, automatically measure and statistically analyze event timing, and graph/plot information, including extracted CAN message data.

The Single Tool Enhances Productivity

The VBA concentrates all your information in one place. Timing measurements across gateways are now possible. Under standing is fast, intuitive, and in a familiar format. Complete, time-correlated understanding of all ECU or circuit behaviors is simple. Time-consuming workarounds are a thing of the past.

Unique Measurement Tools

The VBA can make many measurements not possible with other instruments. Aside from timing measurements, the VBA can also extract CAN digital data from a CAN message stream, graphically plot that data as an analog signal on the oscilloscope display, and compare it to other electrical signals. Here, information on the steering angle and steering angle rate of change is extracted from the CAN message acquisition, rescaled to decimal values, and plotted as a time-correlated "Track" on the VBA display.

Vehicle Bus Analyzer Software Capabilities
  • Symbolic (application layer) decode of up to 4 separate CAN bus
  • Symbolic CAN trigger setup
  • Hexadecimal decode and trigger setup for CAN, FlexRay and LINbus.
  • Binary trigger setup
  • Automated timing measurements, including capability to measure timing across gateways:
    • CAN message to Analog signal
    • Analog signal to CAN message
    • CAN message to CAN message
  • Bus Load % measurements (up to 2 billion events)
  • CAN digital data extraction and display in analog form in scaled decimal values
  • CAN message bit rate calculation
  • Statistical calculations of many measurements
  • Histogram (graphical) display of statistical data, including timing measurements
  • Trend and Track plots of extracted CAN data
  • Persistence trace, mean, and sigma functionality
  • Complete set of Jitter and Timing (@level) parameters
  • Supports for 2.5, 5, and 10 Mb/s FlexRay signals
  • Physical layer measurement parameters for propagation delay, asymmetric delay, truncation and jitter for FlexRay
 

 

OPTION

Serial Data Compliance

QPHY-ENET
QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option
QPHY-USB
QualiPHY Enabled USB 2.0 Compliance Software Option
ENET-2ADA-BNCSMA
Adapter Set- 2 BNC/M to SMA/F
ENET-2CAB-SMA018
Cable Set- 2 SMA-SMA 18 inches
ENET-2CAB-SMA036
Cable Set- 2 SMA-SMA 36 inches
ET-PMT
Electrical Telecom Pulse Mask Software;
WRXi-SDM
Serial Data Mask Software Package for WaveRunner Xi Series

Serial Trigger and Decode

WRXi-USB2-HSICbus D
USB 2.0 HSIC Decode Option
CANbus TD
CANbus TD Trigger and Decode Option
CANbus TDM
CAN Bus Trigger, Decode, and Measure/Graph option
CANbus TD 5LIC
CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes
WRXi-NRZbus D
NRZ Bus Decode Option for WaveRunner Xi
WRXi-Manchesterbus D
Manchester Bus Decode Option for WaveRunner Xi
WRXi-ENETbus D
ENET Bus Decode Option for WaveRunner Xi
CANbus TDM-5LIC
CAN Bus Trigger, Decode, and Measure/Graph option with 1 Hardware Kit and 5 SW Licenses
TC1041-OPTO
CAN 1041 Opto-isolated High-speed Trigger Coupler
TC1050-OPTO
CAN 1050 Opto-isolated High-speed Trigger Coupler
TC1054-OPTO
CAN 1054 Opto-isolated Low-speed Trigger Coupler
TC251-OPTO
CAN 251 Opto-isolated High-speed Trigger Coupler (one is included with CANbus TD)
TC10011-OPTO
CAN B10011S Opto-isolated Truck and Bus Trigger Coupler
WRXi-1553 TD
MIL-STD-1553 Trigger and decode option for WaveRunner Xi
WRXi-ARINC429bus DSymbolic
ARINC 429 Bus Symbolic Decode option for WaveRunner Xi/Xi-A
WRXi-AudioBus TD
AudioBus trigger and decode for WaveRunner Xi
WRXi-AudioBus TDG
AudioBus trigger, decode, and graph for WaveRunner Xi
WRXi-DigRF3Gbus D
DigRF 3G Bus Decode option for WaveRunner Xi/Xi-A
WRXi-DPHYbus D
D-PHY Bus Decode option for WaveRuner Xi/Xi-A
WRXI-I2CBUS TD
I2C Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes
WRXi-PROTObus MAG
Serial Debug Toolkit - Measure Analyze Graph for WaveRunner Xi/Xi-ACompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553
WRXi-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WaveRunner Xi/Xi-ACompatible with USB2bus D, SATAbus D, SASbus D, FCbus D
WRXi-SATAbus D
SATA Decode option for WaveRunner Xi/Xi-ASupports SATA Gen 1, 2, and 3.
WRXI-SPIBUS TD
SPI Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes
WRXi-UART-RS232BUS TD
UART and RS232 Bus Trigger and Decode Option for WaveRunner Xi Oscilloscopes
WRXi-USB2bus D
USB 2.0 Bus Decode option for WaveRunner Xi/Xi-A
WRXI-SENTbus D
SENT Bus Decode Option for WaveRunner Xi

Jitter Analysis Software

WRXi-JTA2
Jitter and Timing Analysis Software Package for WaveRunner Xi Series

Miscellaneous

WRXi-SOFTCASE
WRXi Soft Carrying Case
WRXi-HARDCASE
WRXi Hard Carrying Case
WRXi-KYBD
WRXi Keyboard Accessory
WRXi-RACK
WRXi Rack Mount Accessory Kit
WRXi-MS-CLAMP
WRXi Clamp Mounting Stand

Other Software Options

WRXi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series
WRXi-EMC
EMC Pulse Parameter Package
WRXi-STAT
Histogram and Statistical Analysis Pkg.
WRXi-XMATH
Advanced Math Software Package for WaveRunner Xi Series
WRXi-XDEV
Advanced Customization Software Package for WaveRunner Xi Series
WRXi-XMAP
WRXi Master Analysis Package (XMATH+XDEV+JTA2)
WRXi-XWAV
WRXi Intermediate Math Package
WRXi-XVAP
Value Analysis Software Package (includes XWAV and JTA2) for WaveRunner Xi Series
WRXi-XWEB
Processing Web Editor Software Package for Functions and Parameters for WaveRunner Xi Series

Data Storage Software

WRXi-AORM
Advanced Options Record Measurement Package
WRXi-DDM2
Disk Drive Measurement Software Package for WaveRunner Xi Series

Remote Control/Network Options

USB2-GPIB
External USB 2.0 to GPIB IEEE 488.2 adapter

Power Analysis Software

WRXi-PWR
Power Analysis Option for WR Xi

Digital Filtering Software

WRXi-DFP2
Digital Filter Software Package for WaveRunner Xi Series

Mixed Signal Solutions

MS-500
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option
MS-250
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Mixed Signal Accessories

PK400-1
Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads
PK400-2
Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads
PK400-3
Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads
MSO-MICTOR
36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)
MSO-3M
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)
MSO-DLS-36
16" Digital Lead Set, D18-D35
MSO-MICTOR-SHROUD
Shroud for MSO-MICTOR connector, Kit of 3

Serial Data Test Fixtures

TF-ENET-B
10/100/1000BaseT Ethernet Test Fixture
TF-USB-B
USB 2.0 Compliance Test Fixture

 

 


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会