Manncorp Magic M 手动组件计数器

Datasheet

Full Component Range

Magic M is the most affordable manual component counter available to cover the full range of taped components. The standard unit handles SMDs, including chip components down to 0201, as well as axial and radial parts on tape widths from 4 mm to 72 mm. An adapter with 2 mm pitch is available for 01005 chips. All standard 7" and 13" tape reels can be used. 

Like its motorized counterparts, the Magic M can be set to count out pre-set quantities of parts, making it a time saver for kitting or for component distributors who sell parts on cut tape strips. 

Easy Setup and Changeover

Setup and changeover is fast and simple. For SMD parts, an included adapter is simply placed on the unit and tightened and SMD tape is fed through it from the right to the reel on the left. Set the pitch and go. For axial and radial components, remove the adapter and set the width of the guide bracket.  

A bar code printer and scanner or ribbon label printer can be added to further increase efficiency. Label data includes company name, date, time and quantity.

Highly Portable

Magic M, weighing only 16 lbs, features a built-in carrying handle for easy portability—take the counter wherever it is needed. The entire unit is only 32" x 10" x 4", making it easy to find room for on a bench or tabletop. It is long-life rechargeable battery eliminates the need to locate the unit near an electrical outlet.

MAGIC M Parts Counter - Specifications

Power Source	Hand crank
Component Types	SMDs, Axials & Radials
Adapter for 01005 chips	Optional
Count Qty. Memory	Yes
Auto Alignment	Yes
Date/Time Set	Yes
Foot Control Port	Yes
Quantity Preset	Yes
Alarm	Audible, when preset quantity is reached
Counting Direction	L to R std. R to L Optional
SMD Pitch Setting	Yes
Reel Sizes	7" & 13"
Max. Reel Width	Up to 72 mm
Count Range	99,999
Co. Name on Printouts	Yes
Anti-static Plug & Connector	Yes
110-220V / 50-60Hz Switching	Yes
DC Adapter	Yes
RS-232c & USB Ports	Yes
Ribbon Printer (optional)	Label 2.36" W x .67" L (60 x 17mm)
Bar Code Printer	Optional
Power	AC 110V(60Hz) Optional: AC 220V(50Hz)
Rechargeable Battery	Yes - Charge 48 hours before first use. Charge time thereafter is 12 hours. Operating intervals between charges is ~ 20 hours
Dimensions	805 W x 260 D 100mm H (32" x 10" x 4")
Weight	8.3 Kg (18.3 lbs.)