External DIA L.W.H. ( cm ): 162x90x190
Chamber Ø x D ( cm ): 60 x 100
Capacity ( Liter ): 283
PowerConsumption :14KW , 230V 3 PHASES, 380V OR 415V OR 440V 3 PHASES
Max SterilizationTemperature ( °C ): 134 ± 2
Operate Pressure ( kg/cm² ): 2.2 ± 0.1
Safety door lock by pressure
Dry vacuum (TC-750/TC-615)
Dry vacuum (TC-612/TC-600)
Dry vacuum (TC-500/459/409/406/339/336)
6 Points Temperature record(above TC-500) for floor type
The steam sterilizer is a highly safe sterilizing product with stable function, suitable for major hospitals, clinics and biochemical research laboratories etc., for the sterilization of instrument, cloth, glassware and liquid etc.
The inner chamber is designed to be made of #316 stainless steel, and the outer chamber and the door cover is to be made of #304 stainless steel. The outer layer will be separated by thermal insulation wool for heat preservation. The outside is covered by rectangular stainless steel sheets which provides a more aesthetic appearance and heat preservation.
Stainless steel door with radial lever can effectively lock the door cover tightly and prevent steam leakage Silicone door gasket is high- temperature resistant, durable, and without deformation.
Indicator: Displays the processing status of the sterilization process according to its sequence when the machine is operating.
Practical Sterilization Function:
- Preset Vacuum Function is able to shorten the sterilization time.
- Vacuum drying function is able to remove unwanted moisture quickly, and to reach the Bowie
Dick t est criteria.
- Cloth / apparatus / liquid, Sterilization Functional Switch Mode can be selected to switch
according to different kinds of materials to be sterilized.
- Auto Water Supply Device: Electrical control system is able to detect and sense the water
volume automatically. Upon insufficient water volume, it will supply to high water level
automatically. Use equipment for soft water purification can prolong the life cycle of sterilizer.
- Auto Power-Off Protection Device for water shortage, when water runs out, the electrical control system will automatically cut off the heating power to prevent heating device from overheating, dry-out or even meltdown.
- Pressure Controller, the maximum pressure in the boiler is limited to 2.2 ± 0.1kg/cm ². When the pressure reaches the set value, the heating power will be automatically off to prevent the pressure from rising.
- Safety Valve, when the pressure reaches 2.8kg/cm ², it will start a rapid exhaust of steam and release the pressure from the chamber.
- Pressure Lock, when the pressure of inner chamber exceeds 0.2kg/cm ², the clutch will be locked automatically, and the door cover will not be able to be opened, in order to keep the operator safe.
- Safety Switch of Door Cover, when the door cover is opened, the steam in the outer chamber is unable to enter the inner chamber. It cannot be operated normally unless the door cover is closed tightly.
Simple Operation Interface:
- Digital LED electronic timer is able to control the working hours of sterilization and
drying precisely within the range of 0~99 minutes
- Digital LED electronic temperature controller is able to set the required working temperature quickly, and show the current temperature status of inner chamber. The highest setting temperature is 134°C (218.47 F°)
- The temperature recorder can monitor and record the time and temperature during the whole process of sterilization.
- The pressure gauge of inner and outer chambers is able to clearly show the current working temperature status of interior of sterilizer.
- The opening and closing of turning type door cover is easy to operate.
The highest sterilization temperature is 134°C(218.47 F°), and the pressure value for sterilization is able to reach up to 2.2kg/cm² (2.16 bar or 31.29psi).
Heating device with high power takes 20 minutes to complete sterilization under 121°C, or 15
minutes under 132°C.
The preparation steps for sterilization function shown as following:
- Fully-automatic operation-
put the items to be sterilized inside, and close the door cover set mode (Cloth / apparatus / liquid) / temperature/time turn on the power/activate the switch supply water automatically heating preset vacuum for 3 times sterilizing steam exhaust for inner chamber vacuum dryi completion
Steam exhaust valve outer chamber
Dry valve, inner chamber
|99Minutes x 2pcs|
Glass & Liquid sterilization function
Low water indication / cut-off
Water Level Control & Protection
Safety door lock activated by pressure
Chamber material stainless steel #316(standard#304)
|Construction||ST. ST. #304 HOUSING, FRAME, DOOR, CHAMBER AND JACKET|
|Auto water filling||Optional|
|Standard Accessories||ST. ST. #304 TRAY x 1PC.
VIEWER TUBE x 2PCS.
|Control System||PLC CONTROL SYSTEM WITH DIGITAL TEMPERATURE DISPLAY TEMPERATURE CONTROL SYSTEM|
|Electric Voltage||230V 3 PHASES,
380V OR 415V OR 440V 3 PHASES
|Optional Accessories||ST.ST.BASKET x 3 PCS
TRAY SET(TRAY x 2, FRAME x 1)
|Pressure Control Switch||YES / 2 PCS|
|Temperature Control Switch||YES|
|6 Points Temperature Recorder||CAN BE OPTIONED|
|Double Door||CAN BE OPTIONED|
|Sliding Door Construction||N/A|
|Safety Device||PRESSURE PROTECTION SWITCH,
TEMPERATURE CONTROL SWITCH,
WATER LEVEL CONTROL SYSTEM,
LOW WATER INDICATION/CUT-OFF,
SAFETY VALVE, DOOR ALARM, PRESSURE DOOR AUTO-LOCK
|Life Time||7 YEARS|