Memmert HPP400 恒定人工气候箱/ 湿度/ 温度 (384L)

- Volume: 384 liters

- Interior dimension: 640W x 1200H x 500D mm

- Exterior dimension: 824W x 1720H x 756D mm

- Stainless steel grids: 2

- Max. number of grids: 14

- Working temperature range without humidity: 0 (at least 20 below ambient temperature) to 700C

- Working temperature range with humidity: +5 (at least 20 below ambient temperature) to 700C

- Setting temperature range without humidity: 0 – 700C

- Setting temperature range with humidity: 5 – 700C

- Setting accuracy: 0.1°C

- 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

- Setting range humidity: 10 – 90% rh

- Humidity supply with distilled water from external tank by self-priming pump

- Humidification by hot steam generator

- Dehumidification by cold trap using the Peltier technology

- Setting accuracy: 0.5% rh

- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays

- Language settings: German, English, Spanish, French, Polish, Czech, Hungarian

- Adjustable parameters: temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones

- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

- Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %

- Function SetpointWAIT: the process time does not start until the set temperature is reached.

- Calibration: three freely selectable values each, temperature and humidity

- Interface: Ethernet LAN, USB

- Programme stored in case of power failure

- Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function

- Displaying of already logged protocol data on the ControlCOCKPIT (max 10000 values correspond to approx. 1 week)

- Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display

- Additionally integrated over and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature

- Integral fault diagnostics for temperature and humidity control

- Alarm: visual and acoustic

- Energy-saving Peltier heating-/cooling system integrated in the rear

- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

- Door: fully insulated stainless steel door with 2-point locking, inner glass door

- Internal data logger with a storage capacity of least 10 years

- Voltage: 230 V, 50/60 Hz

- Electrical load: approx. 1200 W.

- Ambient temperature: 16 – 400C

- Humidity: max. 70% rh, non-condensing

- Installation: 4 feet; mounted on lockable castors


+ Calibration certificate standard values 100C and 370C, 60% rh at 300C (Memmert supply)

+ Stainless steel grids, 2 pcs

+ Water tank including connection hose

+ Manual



  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化