Memmert ICH110L 湿度试验箱,108升

Working temperature range     from +10°C up to +60°C with humidity
Setting accuracy temperature     0.1°C
Temperature     2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Humidity     humidity supply with distilled water from external tank by self-priming pump
Humidification     humidification by hot steam generator
Humidity     active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative humidity - resolution of display 0.1 %, setting accuracy 0.5 %
Control of standard components
Light     illumination unit consisting of 3 fluorescent lights with cold white light (standard illuminant D65, 6.500K) and 2 UV-lamps in the spectral range of 320-400 nm
Light     daylight and UV-light can be programmed individually via controller
Light     cold white light +/- 6 %, for UV-light +/- 10 %
Control technology
ControlCOCKPIT     TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting     German, English, Spanish, French, Polish, Czech, Hungarian
Timer     Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT     the process time does not start until the set temperature is reached
Calibration     three freely selectable values each, temperature/humidity/CO2
adjustable parameters     temperature (Celsius or Fahrenheit), fan speed, light, programme time, time zones, summertime/wintertime
Fan     forced air circulation in working chamber adjustable from 10 to 100 % in 10 % steps
Documentation     programme stored in case of power failure
Programming     AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Temperature control     mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature control     over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY     additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system     integral fault diagnostics for temperature and humidity control
Alarm     visual and acoustic
Heating concept
Air jacket     air jacket heating system for gentle all-around heating
Heating concept     no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Cooling     energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
Defrosting     highly efficient automatic defrosting system
Standard equipment
Internals     2 stainless steel grid(s), electropolished
Works calibration certificate     standard values +10 °C and +37 °C, 60 % rh at +30 °C
Door     fully insulated stainless steel door with 2-point locking (compression door lock)
Door     inner glass door
Stainless steel interior
Volume     108 l
Dimensions W x H x D in mm     w(A) x h(B) x d(C): 560 x 480 x 400 mm
Max. number of internals     5
Max. loading of chamber     150 kg
Max. loading per internal     20 kg
Textured stainless steel casing
Installation     on lockable castors
Dimensions     w(D) x h(E) x d(F): 745 x 1233 x 634 mm
Housing     rear zinc-plated steel
Electrical data
Voltage Electrical load     230 V, 50/60 Hz
approx. 1350 W
Voltage Electrical load     115 V, 50/60 Hz
approx. 1350 W

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化