Memmert SN110plus 消毒器(108L)

-  Volume: 108 liters

-  Interrior dimensions: width 560 x height 480 x depth 400 mm

-  Exterior dimensions: width 745 x height 864 x depth 584 mm

-  Stainless steel grids (standard): 2

-  Max. number of grids/shelves: 5

-  Working temperature range: at least 5 above ambient temperature to 2500C

-  Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C

-  Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking overfunctions in case of an error

-  HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 %.

-  ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour display.

-  German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT

-  Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

-  Function setpointWAIT: the process time dose not start until the set temperature is reached

-  Calibration: three freely selectable temperature values

-  Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones

-  Convection: natural convection

-  Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps

-  Programme stored in case of power failure

-  AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

-  ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function

-  Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)

-  Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging

-  Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature, overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display

-  Additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature

-  PID microprocessor control with integrated auto-diagnostic system

-  Alarm: visual and acoustic

-  Door: fully insulated stainless steel door with 2-point locking

-  Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

-  Internal data logger with a storage capacity of at least 10 years

-  100% AtmoSAFE

-  Interface: Ethernet LAN, USB

-  Voltage: 230 V, 50/60 Hz

-  Electrical load: approx. 2800 W

-  Ambient temperature: 5 – 400C

-  Humidity: max. 80% rh, non-condensing


+ Works calibration certificate at 1600C (Memmert supply)

+ Stainless steel grid, 2 pcs

+ USB stick with AtmoCONTROL software

+ Manual



  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化