Memmert UN75m 供暖高温炉/ 室式/ 电动/ 不锈钢(74L)

Language setting: German, English, Spanish, French, Polish, Czech, Hungarian

Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable temperature values

Vent: vent connection with restrictor flap

Documentation: programme stored in case of power failure

Autodiagnostic system: for fault analysis

Door: fully insulated stainless steel door with 2-point locking (compression door lock)

Internals: 2 stainless steel grid(s), electropolished

Works calibration certificate: Calibration at +160°C

Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

Volume: 74 l

Dimensions: w(A) x h(B) x d(C): 400 x 560 x 330 mm

Max. number of internals: 6

Max. loading of chamber: 120 kg

Max. loading per internal: 20 kg

Dimensions w(D) x h(E) x d(F): 585 x 944 x 514 mm (d +56mm door handle)

Housing: rear zinc-plated steel 

Voltage Electrical load 230 V, 50/60 Hz  approx. 2500 W

Voltage Electrical load 115 V, 50/60 Hz  approx. 1800 W 

Set Up: The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.

Altitude of installation: max. 2,000 m above sea level

Ambient temperature: +5 °C to +40 °C

Humidity rh: max. 80 %, non-condensing

Overvoltage category: II

Pollution degree:

Dimensions approx incl. carton w x h x d: 730 x 1130 x 670 mm

Net weight: approx. 66 kg

Gross weight carton: approx. 85 k

Detail

Datasheet 


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化