No-load speed: 4500 - 11500 rpm
Rated input power: 900 W
Output power: 470 W
Type of edges: Chamfer and radius
Max. chamfer width 45°: 6 mm / 1/4 "
Max. chamfer height at 45°: 4 mm / 5/32 "
Possible radii: R2 / R3
Grading of cutting depth setting: 0.1 mm / 0.00394 "
Curves smallest internal Ø: 13 mm
Weight (without power cable): 2.5 kg / 5.5 lbs
Cable length: 4 m / 5/32 "
Sound pressure level: 87 dB(A)
Sound power level (LwA): 98 dB(A)
Uncertainty of measurement K: 3 dB(A)
2 x carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
Screwdriver Torx 15
2 x Carbide indexable inserts radius R2
2 x Carbide indexable inserts radius R3
Accessories for bevelling tools
Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for a uniform finish and high quality of the surface when processing straight sheets
Metabo Marathon-motor with patented dust protection for long service life
Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim design for ideal handling