Driver type: feather keyways (2x180 degree)
Torque range : 37 - 368 lbf. ft/ 50 - 500 N.m
Size ( LxW in): 6 x 1.5 in
Weights: 0.5 lbs/ 0.2 kg
Rated Output: +/- 5VDC +/- 0.2% FS
Excitation Recommended: 11VDC to 26VDC (pole secure)
Nonlinearity: 0.2% FS
Usable Temperature Range 41 to 122 F
Mating Connector: Tuchel Series 581 (98-2030-09-12)
Safe Overload: 150% of Rated Output
RA models are Torque & Angle tranducers.
The Mountz brushless rotary torque and angle shaft sensors are designed for precision torque testing. Used in-line with rotating shafts or nutrunners for feedback control. Ideal for motor testing, high RPM Tools or rotational measurement applications.
Non-contact signal transfer and maintenance free.
The brushless rotary torque & angle sensor is a compact design & bi-directional.
Used in-line with rotating shafts or nutrunners for feed back control. Motor testings, high RPM Tools or rotational measurement applications.
- Angle output 2-channel quadrature
- 360 pulses per rotation
- Ability to measure the rotation angle of a fastener
- Joint rate & breakaway torque can be measured too
Features ARCII technology, an instant auto-recognition system of the BLRTSX connected to the PTT or LTT.
Accuracy ± .2% of full scale*.
Note: Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (PTT or LTT).