NOVOTEST T-U3 超声波硬度计 (UCI probe)
制造商: NOVOTEST Model: T-U3 P/N: T-U3 (Lab) - 联系
UCI probe types: 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
Measuring range: HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
Measuring accuracy: HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
Measuring direction: Any direction 360°
Data storage: Limited only by the memory card
Communication: Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scale: HRC, HB, HV, HRB, HS, HL, MPa
Materials: Pre-calibrated for steel, has calibration scales for additional custom materials
Data display: Load applied/contact (UCI), Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and Smart Mode (Filter of incorrect measurements)
Indication: Color LCD display (320×240)
Operating environment: Temperature:-20°C~40°C; Humidity: 30%~80%R.H.
Power supply: DC 4,5V (3 pcs batteries AA)
Instrument dimensions: 160x75x30mm
Net weight: Approx. 0.3kg (without probe)
Batteries life: Approx. 10 hours
Standard package: Hardness tester, UCI probe, 3 AA batteries, Charger, USB cable, Operating manual, Case
Option Rockwell Hardness Test Block HRC (HRA orHRB): 160 USD
Option Brinell Hardness Test Blocks HB: 300 USD
Option Vickers Hardness Test Blocks HV: 240 USD
Option Leeb Hardness Test Block (type D): 320 USD
Option Leeb Hardness Test Block (type G): 800 USD
Descriptions:
- The most popular portable hardness tester in the world is the Leeb hardness tester, however, there are tasks that using this method is very difficult or even impossible to solve. This is due to the physics of the method, which assumes the massiveness of the testing object, to ensure the inertness of the product when the Leeb’s impact body hits the surface with a given force. In order to solve a wider range of tasks on the rapid measurement of metal hardness, our company offers hardness testers that implement the method of ultrasonic contact impedance (UCI) in accordance with ASTM A1038. A vibrating rod (mechanical resonator) with a diamond tip acts as an indenter in these devices, when it indent into the material, the base frequency of the resonator changes, on the basis of which the hardness is calculated.
The device can be equipped with a Bluetooth module!
- Do hardness measurements, calibrate the device, set up a convenient display of values, save the results of hardness measurements, synchronize the archive with your other devices and a PC, transfer measurement results to your colleagues – all this is available with your smartphone thanks to the special NOVOTEST app for Android.
- Using a Bluetooth connection, your smartphone connects to the hardness tester and you have a completely new device – a new generation hardness tester! The intuitive interface, ample opportunities for documenting results, Internet access, touch screen, camera, microphone and GPS receiver of a smartphone turn your hardness tester into something completely unique and previously inaccessible.
The most modern and advanced ultrasonic device TM NOVOTEST is UCI Hardness Tester NOVOTEST T-U3, the main advantages of the device are:
- Hardness measurement of any mass products with a thickness more than 1 mm – inaccessible to the dynamic (Leeb) hardness testers (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness control of metal coatings, etc.)
- Measuring the hardness of the surface hardened layer
- Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
- Wide range of hardness testing
- Various measurement modes
- Calibration of any scale in any range
- Convenience and ease for measurement
- Optimized number of buttons
- Large full color graphic display with bright back-lighting
- Calibrations stored in memory of probe
- Extended temperature range (frost, down to – 40°C)
- Internal memory and communication with PC
- New, intuitive menu with tips on the buttons
- Optional wireless mini printer
- Water resistant case
- Rubber protected bumper
- Has different operating modes:
+ Graph – the mode of building of graph
+ Histogram – the mode of building of histogram
+ Statistics – the mode of statistic
+ Smart – the mode of filtering of incorrect measurements
Option
- Standard Set of Rockwell Test Blocks HRC (3 pc. In set)
- Standard Set of Brinell Test Blocks HB (3 pc. In set)
- Standard Set of Vickers Test Blocks HV (3 pc. In set)
- Leeb Hardness Test Block (1 pc. In set)
Datasheet
VIDEO REVIEW
Correct UCI probe use for accurate results
Calibration UCI Hardness Tester NOVOTEST T-U3 (T-UD3)
Operation with portable wireless printer
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化
