PCE CM 3 钳形表 (AC 200 A)

Specifications

DC    

Measuring range; Resolution; Accuracy

4V DC; 1 mV; ± (1.2% of Mw + 2 digits)

40V DC; 10 mV; ± (1.5% of Mw + 2 digits)

400V DC; 100 mV; ± (1.5% of Mw + 2 digits)

600V DC; 1V; ± (2% of Mw + 2 digits)    

Input impedance: 10 MΩ  

Overvoltage protection: 600V DC ; 600V AC RMS

AC    

Measuring range Resolution; Accuracy

4V AC; 1 mV; ± (1.5% of Mw + 5 digits)

40V AC; 10 mV; ± (1.5% of Mw + 2 digits)

400V AC; 100 mV; ± (1.5% of Mw + 2 digits)

600V AC; 1 V; ± (2% of Mw + 2 digits)  

Input impedance: 10 MΩ  

Overvoltage protection: 600V DC; 600V AC RMS  

Frequency range: 50 ... 400 Hz

Alternating current    

Measuring; range Resolution; Accuracy

200 A AC; 100-mA; ± (3.0% of Mw + 5 digits)

Overload protection: 200 A AC  

Frequency range: 50 ... 60 Hz

Resistance    

Measuring range; Resolution; Accuracy

400 Ω; 0.1 Ω; ± (1% of Mw + 4 digits)

4 kΩ; 1 Ω; ± (1.5% of Mw + 4 digits)

40 kΩ; 10 Ω; ± (1.5% of Mw + 4 digits)

400 kΩ; 100 Ω; ± (1.5% of Mw + 4 digits)

4 MΩ; 1 kΩ; ± (2.5% of Mw + 4 digits)

40 MΩ; 10 kΩ; ± (3.5% of Mw + 4 digits)

Overvoltage protection: 250V DC; 250 AC RMS       

Connection thermocouple: Type K connection with adapter

Capacity    

Measuring range; Resolution; Accuracy

4 nF; 0.1 nF; ± (5% of Mw + 20 digits)

40 nF; 1 nF; ± (3% of Mw + 5 digits)

400 nF; 10 nF; ± (3% of Mw + 5 digits)

4 μF; 100 nF; ± (3% of Mw + 5 digits)

40 μF; 1 μF; ± (3% of Mw + 5 digits)

100 μF; 10 μF; ± (3% of Mw + 10 digits)

Overvoltage protection: 250V DC ; 250 AC RMS      

Check feature: Test Display

Diode test: Test current: 0.5-mA 

Reverse Voltage: 1.5V Forward voltage of the diode

Continuity test Open circuit Voltage 0.5V: Noise when resistance <50 Ω   

Overvoltage protection: 250V DC; 250 AC RMS

Jaw Capacity: About 17 mm / .7 in

Display: 4000 digit LCD with backlight

Continuity test: Noise when resistance <50 Ω

Test current: About 0.5-mA

Open circuit voltage: <2V DC

Battery indicator: Battery icon when battery voltage low

Display overrange: OL appears in the display

Refresh rate display: 3 Hz

Temperature sensor: Thermocouple type K

Input impedance: 10 MΩ

Operating conditions: 5 ... 40°C / 41 ... 104°F, 80% rh non-condensing

Storage conditions: -20 ... 60°C / -4 ... 140°F, 80% rh non-condensing

Operating altitude: <2000 m

Power supply: 2 x 1.5V AAA battery

Automatic shutdown: 30 minutes

Security conditions:

IEC1010-1 (2001) 

CAT II 1000V 

CAT III 600V

Pollution degree 2


Dilivery Contents 

1 x Clamp meter PCE-CM 3

2 x Test leads

2 x Measuring tip

1 x Adapter thermocouple

1 x Thermocouple type K

2 x AAA batteries 1.5V

1 x User manual

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化