Warranty: 12 months
Dispensing method: 16 ways such as manual timing and automatic timing can be set freely
Epoxy time: 0.01S - 99.99S adjustable
Intervals: 0.1S - 9.9S adjustable
Repeated work error: ±0.05%
Internal working voltage: DC 24V
Minimum amount of glue: 0.01ml
Air pressure input: 0.25 - 0.7MPa (2.5-7kg)
Air pressure output: 0.01 - 0.7MPa (1-7kg)
Dimensions: 238 (L) × 150 (W) × 60 (H) mm
weight: About 1.7kg
1. The timer is used to control the time of each injection, and the glue is dispensed regularly to ensure that the amount of glue is consistent.
2. Adjust the air pressure, select the appropriate time and the needle, you can change the amount of each drop and the time of the drop, suitable for different needs.
3. It can be filled with liquid or slurry, such as red plastic, yellow plastic, epoxy resin, tin paste, silicone rubber, flux and so on.
4. Foot control and manual control are available. The manual switch is more suitable for standing staff.
5. A variety of syringes and needles are available.
6. There is also a fully automatic dispenser available.