快速支持
直接联系认证专家
Burst Generator
Burst frequency: Single pulse up to 2 MHz
Pulse voltage: 100 V - 4800 V
Polarity burst packet: pos., neg., alternating
Pulse shape: acc. to IEC 61000-4-4
Max. pulses / sec: 15000
Max. pulse / packet: 2000
Interface: RS 232
Monitoring Output: BNC-socket
Operating temperature: 0 - 40 °C
Dimensions: 19" housing (3 RU)
Weight: 12.5 kg
Supply voltage: 100-240 V / 47-63 Hz
Internal single-phase coupling network
Nominal voltage AC: max. 230 V / 16 A, 50 / 60 Hz
Nominal voltage DC: max. 110 V / 8 A
Phase display: LED red; LED green
Coupling capacity: 33 nF
Coupling switch: L, N - E, PE-E, L - E etc.
Test sample connection: Schuko socket, additional laboratory sockets
High voltage output: FISCHER HV-socket
Options
CWG 520 3-ph. coupling network 4 x 16 A, burst and surge
CWG 523 3-ph. coupling network 4 x 32 A, burst and surge
CWG 524 3-ph. coupling network 4 x 60 A, burst and surge
CWG 524-B 3-ph. coupling network 4 x 60 A, burst
SFT 470 probe set for magnetic field
SFT 415 coupling clamp
SFT 415-1 capacitive coupling clamp with hood
SFT 430 HV cable for coupling clamp 1 m
SFT 415-CS calibration set coupling clamp
SFT 450-1 50 Ω attenuator, divider 500:1
SFT 450-2 1000 Ω attenuator, divider 1000:1
SFT 450-Set 50 + 1000 Ω attenuators, necessary for independent verification of the
burst impulse at the generator or coupling clamp SFT 415
EMV-SOFT control software for burst etc.
Datasheet
