Skylark LSG-6k20 自动电冲击发生器

Energy storage capacitor: 20μF ±10%

Open circuit output voltage: 0.2-6kV ±5%

- Front time: 10μs ±30%

- Pulse half peak time: 700μs ±20%

Short circuit output current: Maximum 150A ±5% (impedance 40Ω)

- Front time: 5μs ±30%

- Pulse half peak time: 320μs ±20%

Output polarity: Positive, negative, positive and negative cycle, alternating positive and negative, first positive and then negative, first negative and then positive

Output impedance: 15Ω ±10%, 40Ω ±10%

Surge trigger method: Automatic or manual, single trigger

Number of surges: 1-99 times

Programmable test program: Built-in IEC standards and user-defined programs, up to 1000 groups

Surge interval time: 20-9999s

Built-in network capacity: DC50V, 0.1A

Built-in network coupling: Line-ground (T1+R1+T2+R2 at the same time to GND)

Built-in network coupling device: 100Ω+90V gas discharge tube per line

Use environment: Temperature: 15°C－35°C relative humidity 10%－75%

System power: AC220±10%, 50/60Hz, about 300W

Dimensions: Width 470mm×Height 260mm×Depth 500mm

Total Weight: About 30kg

Datasheet: