SMAC CW61148 高功率机床

Max swing over bed: 1480mm

Max swing over carriage: 1000mm

Max swing over gap: 1820mm

Weight of workpiece: 10tons

Center distance: 2m,3m,4m,5m,6m,8m,10m,12m

Gap length: 600m

Bed width: 1100mm

Main spindle hole: F130mm

Spindle taper: Metric 140#

Spindle speed: 3.15-315r/min or 2-200r/min or 2.5-250r/min./21 steps counter clockwide;12steps counter clockwide

Metric thread: 44kinds 1-120mm

Inch thread: 31kinds 1/4-24tpr

Mould thread: 45kinds 0.5-60mm

Diametric thread: 38kinds 1/2-56DP

Longitudinal feeding range: 56kinds 0.1-12mm

Cross feeding range: 56kind 0.1-12mm

Rapid feeding (Long/Cross): 1200mm/min,1800mm/min

Tool section: 45*45mm

Crossslide travsers: 860mm

Toolpost travsers: 400mm

Tailstock quill diameter: F260mm

Tailstock quill taper: Metric 80#

Quill traverse: 300mm

Main motor: 30kw

Coolant motor: 0.15kw

Rapid traverse motor: 1.5kw

Tailstock motor: 3kw

Standard accessorids: φ1250mm 4-jaw chuck, Steady rest:φ200-φ500,φ300-φ800

Optional accessories:Roll Support,bigger 4 jaw chuck