Suneast E-FLOW-Z450 钎焊炉 (50~450mm, 5050x1520x1750mm)
制造商: Suneast Model: E-FLOW-Z450 - 联系
External spraying
Dimension:LxWxH(mm) 5050x1520x1750
Weigh: Approx 2050kg
Power Supply: 3PH 380V 50HZ
Startup Power: 33KW
Operation Powr Consumption: Approx.9KW
Control System: PC+PLC
Spraying movement: Step motor
Spray Pressure: 0.2Mpa-0.4Mpa
Flux Flow Arrange: Option
Auto Fill Flux: Standard
Exhaust: Top exhaust+Side exhaust
Exhaust Ducting Diameter(mm): Φ250
Exhaust Fan Power: 750W
Preheating Mode: Convection / IR emitter
Control Mode: PID
Preheating Zone Number: 3
Preheating Length(mm): 1800
Preheating Temperature: Room temperature~200℃
Warm-upTime(min): Approx.12min (setting:150℃)
Blower Motor: 250W 3PH 220VAC
PCB Width(mm): 50-450
Convoyor Direction: L-R (Option:R-L)
Conveyor Speed(mm/min): 500~1800
Conveyor Height(mm): 750±20
Available Component Heigh (mm): Top 120, Bottom 15
Conveyor Speed Control Mode: Frequency converter closed-loop stepless speed regulation
Fingers: Spring tablet finger /D-40 duckbill finger/double hook finger/heavy double hook finger, choose one.
Conveyor Angle: 4-7°
Type of solder Pot: Motor drive
Solder Pot Material: Casting Iron
Wave Height Adjustment: Frequency converter: computer digital control
Cooling Method: Forced air cooling, Option: water cooler
Heater Power: 13.5KW
Solder Pot Temperature: 300℃
Solder Pot Capacity: Approx.550kg
Wave Drive Power: 180W*2 3PH 220VAC
Solder Pot Warm-up Time: Approx.150min (setting:250℃)
Temperature Control Mode: PID
Finger Cleaning System: Brush
*Note: 4 sections of preheating can be customized, and the length is 2.3m.
Catalog
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化