Suneast PERFECTFLOW/450 隧道式全密封充氮波峰焊机 (50~450mm,6000×1522×1750mm)

Dimension:L*W*H(mm):    6000×1522×1750

Weight:      Approx.2050kg

Power Supply:        3PH 380V 50HZ

Start up Power:        33KW

Normal Running Power:           Approx.9KW       

Control System:        PC+PLC

Spraying movement:        Step motor

Spraying Pressure:        0.2Mpa~0.4Mpa

Flux Flow Control:        Option

Auto Flux Filling:        Standard

Exhausting:        Top exhaust

Exhausting Pipe Diameter(mm);        φ250

Exhaust fan power:        750

Preheating Mode:        Hot air convection/IR

Temperature Control Mode:        PID

Preheating Zone Quantity:        3

Preheating Zone Length(mm):        1800

Preheating Temperature Range:        Room temperature~200℃

Warm-up Time(min):        Approx.12min(setting:150℃)

Preheating Blower Motor:        250W 3PH 220VAC

Width(mm):     50~450

PCB Conveying Direction:        L→R(Option:R→L)

Conveying Speed(mm/min):        500~1800

Conveying Height(mm):        750±20

Available Component Height(mm):        Top 120, Bottom 15        

Conveying Speed Control Mode:        Closed loop stepless speed regulation by inverter

Finger:        Heavy type double hook finger; Option:Special jig for fixture

Conveying Angle:        4.5~6.3°

Solder Pot Type:        Mechanical        

Solder Pot Material:        Casting Iron

Wave Height Adjustment        Inverter: Digital Control by PC

Cooling type:        Nitrogen knife cooling

Solder Pot Heating Power:        13.5KW

Max Solder Pot Temperature:        300℃

Solder Pot Capacity:   Approx.550kg

Wave Driving Power:        180W*2 3PH 220VAC

Solder Pot Warm-up Time:        Approx.150min(setting:250℃)

Temperature Control Mode:        PID

Finger Cleaning System:        Brush

Nitrogen purity        : 99.999%

Nitrogen consumption:        Approx.22m³/h

Nitrogen pressure:        0.4Mpa~0.6Mpa