Symor TGDJS-500-A 温湿度试验箱

Interior Dimension W*D*H (mm):  800×700×900

Exterior Dimension W*D*H(mm): 1350×1300×2200

Temp. Range: -20°C~+150°C   

Humidity Range: 20% ~ 98% R.H(5%-98%RH is available,5% needs a dehumidifier)

Humidity Bias: +2/-3% R.H

Temp. Fluctuation: ≤±0.5°C

Temp. Uniformity: ≤2°C

Heating Rate: 2~3°C/min

Cooling Rate: 0.7~1°C/min

Exterior Material: A3 steel plate,surface electrostatic spraying

Interior Material: Reinforced mirror SUS Number 304 stainless steel

Insulation: Polyurethane foam

Controller: 5.7 inch Temi880 Programmable LCD controller

Circulation System: low-noise motors, single cycle, long axis and stainless steel centrifuge fan

Water Supply: automatic water supply, with water shortage alarm function

Humidification Mode: Shallow slot humidification, electric heating steam humidification mode

Dehumidification Mode: Refrigeration dehumidification mode

Refrigeration: Unit cooling mode / Dual cooling mode (air-cooled),according to specific requirement, 

Refrigerant R404A/R23, France "TECUMSEH" hermetic refrigeration compressors

Heater: NiCr heater

Cooler: Copper tube aluminum fin cooler

Timing: 0.1~999.9(S.M.H)

Security Devices: Leakage and outage protection,compressor over-pressure,overheat,over-current protection,

overload fusing protection,audio signal alarm

Standard Configuration: One observation window(Resistant to high and low temperatures hollow toughened glass), 

a fluorescent lamp, two layer stainless steel shelves

Power Supply:  AC220V·50HZ/380V·50HZ or customized



  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化