Terasic Altera Arria V GX收发器入门套件

    Arria V GX  5AGXFB3H4F35C4N
System controller: MAX® V 5M2210ZF256C4N
    Power monitor GUI
    Single analog-to-digital converter (ADC), eight channels
    Non-isolated power rail
    Fast passive parallel (FPP) x16 mode through parallel flash loader (PFL)
    Control and status registers
Embedded USB-BlasterTM II:
    MAX II EPM570GM100C4N
    x4 XCVR, 2.7 Gbps (max by level shifter) and 270 MHz TX clock HDMI TX connector
    STMicroelectronics HDMI level shifter STHDLS101T
    Level shift XCVR PCML 1.5V <-> TMDS level
    DDC and HPD <-> HDMI compliant level
    Data channel up to 2.7 Gbps; HDMI 1.3 compliant
    Clock channel up to 270 MHz; enough to support 2.7 Gbps data rate
    HDMI specification: clock period = 10x of UI
    x1 XCVR TX/RX loopback
    x2 SMB connectors and cable (cable not included in kit)
    Up to 2.97 Gbps
    Uses National Semiconductor driver/receiver LMH0384SQ/LMH0303SQx
    Requires 148.5 MHz and 148.35 MHz at XCVR refclk to support US and EU standard respectively
    Use VCXO to fine tune and lock to the recovered CDR frequency
    x8 XCVR up to 6.375 Gbps
    Not complied to PCI Express® (PCIe® ) HIP pin assignment
    x4 CMOS
    x8 TX and x9 RX differential interface using dedicated TX/RX channels
    x2 low-voltage differential signalling (LVDS) clock in
    x2 differential clock out
    Minimum current support
    2A @ 3.3V
    1A @ 12V
    Dedicated clock domain from Si 5338 clock generator for xcvr refclk
    HSMC loopback with BTS GUI
    1x XCVR TX/RX channel
    1x LVPECL clock input
    1X LVPECL clock output
    Dedicated clock domain from Si 5338 clock generator for xcvr refclk
    Micron MT41J64M16LA-15E DDR3 SDRAM 8MX16X8
    Two devices: 2 x16 width = x32
    BTS DDR3 SDRAM GUI using Uniphy and high performance (HP) controller II
    512k x36, 18 Mb ISSI IS61VPS51236A
    Shared address or data with flash
User IO
    LCD character
    x4 DIP switch
    x3 PB
    x4 LED
    FPP x16 mode
    Dual flash 512Mbit Numonyx PC28F512P30BF (52 MHz FMAX )
    JTAG header
Embedded USB Blaster II
    Cypress Microcontroller CY7C68013A as USB PHY 2.0
    MAX II
    10/100/1000 Base-T
    RJ-45 connector, on-board LED for link status
    Marvell Ethernet PHY 88E1111
    Requires 50 MHz clock from CLKIN



The Altera® Arria® V GX Starter Kit provides a complete design environment that includes all the hardware and software you need to develop cost-sensitive FPGA applications immediately. The development kit is RoHS compliant. The development kit features the following:

  • Arria V GX FPGA—360KLE, F1152 package, 24X6.5G XCVRs, C4 speed grade
  • One I/O expansion slot—one high-speed mezzanine card (HSMC) connector
  • 256 MB of SDRAM memory
  • High-definition multimedia interface (HDMI) and serial digital interface (SDI) connections
  • SMAs
  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化