THORLABS LN81S-FC 强度调制器 (1525 nm - 1605 nm)
制造商: THORLABS Model: LN81S-FC - 报价要求
- 联系
Optical
Operating Wavelength(a): 1525 nm - 1605 nm
Optical Insertion Loss: ≤5.0 dB (4.0 dB Typ.)
Optical Return Loss : ≥40 dB
Optical Extinction Ratio (@ DC): ≥20 dB
Optical Input Power: ≤100 mW
Electrical
E/O Bandwidth (-3 dB): ≥10 GHz (14 GHz Typ.)
Operating Frequency Range : DC to 15 GHz (Min)
RF Vπ (@ 1 GHz): ≤6.5 V (5.6 V Typ.)
RF Vπ (@ 20 GHz): -
RF Vπ (@ 40 GHz): -
DC Bias Vπ (@ 1 kHz): ≤10.0 V (6.5 V Typ.)
S11: -12 dB (-10 dB Max), DC to 10 GHz
RF Input Power: 24 dBm Maximum
Photodetector
Reverse Bias Voltage: -5.5 V to -3.0 V
Responsivity: 0.1 mA/mW to 0.5 mA/mW
Output Optical Power Monitoring Range: -5 dBm to 10 dBm
Mechanical
Crystal Orientation: X-Cut
RF Connection: Male SMP (GPO®† Compatible), Full Detent
Fiber Type: Input: PANDA Polarization Maintaining. Output: SMF-28®‡ Single Mode
Fiber Lead Length: 1.5 m Typ.
Environmental
Operating Case Temperature: 0 °C - 70 °C
Storage Temperature: -40 °C - 85 °C
(a) These modulators are designed for use at the specified wavelengths. Using the modulator at other wavelengths may cause an increase in the optical loss that is not covered under warranty. In some cases, this loss can be temporary; for instance, the increase in loss caused by shorter wavelengths can usually be reversed by heating the modulator to 80 °C for an hour.
(b) The LN82S-FC includes a bias circuit that couples the DC bias onto the RF drive electrode. Depending on the application, an external DC block may be needed at the RF input.
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化