Display Type: 4 ½ digits LEDs (19999)
Overload Indication: O.L.
Conversion Rate: 3 readings per second
Terminal Configuration: 4-Wire Kelvin
Current Source Compl. Voltage: Clamped at 1.6V
Power: 4“D” Cell 1.2V recharg. NiMH Batteries 10000mAh
Battery Charger: 6VDC at 300mA nominal
Temperature Coefficient: ±0.002% per °C(from 0°C~15°C and 35°C~50°C)
Operating Temp. Range: 0°C~50°C
Storage Temp. Range: -10°C~70°C
Weight: 3lbs/1.3kg net; 6lbs/3kg shipping
-Battery Charger 115Vac to 6VDC @ 300mA
-4 Heavy Duty rechargeable NiMH Batteries 1.2V 10000mAH.
-Carrying Case for the meter with room for the battery charger and Lead Sets
-Pelican 1500 Hard Carrying Case with Custom Foam for the meter, battery charger, up to 3 sets of leads and extra batteries.
-Standard 19" equipment rack adaptor
-This option provides parallel BCD data on p rear-panel 50-pin connector. All outputs are TTL comparable levels with a drive capability of 1 LS load.
-Continuous Isolated AC Power
-6-pin Mil-Spec circular connector (MS3112E10-6S) replaces the four-terminal banana jacks and the battery charger jack. Makes it physically impossible to simultaneously connect the AC/DC Charger while measuring with the test leads.