Yamato DNE600 Forced Convection Constant Temperature Oven

Method: Forced circulation

Temperature control range: Room temp.+ 10℃ to 210℃ (Ambient temp.: 23℃, No load, Damper: full opened)

Temperature adjustment accuracy: ±0.5℃ (at 210℃)

Temperature distribution accuracy: ±2.0℃ (at 210℃)

Time required to reach highest temperature: Approx. 60min

Interior: Stainless steel plate (SUS304)

Exterior: Electrical zinc plated steel plate, Epoxy and melamine resin coating

Heat insulation material: Glass wool

Heater: Stainless pipe heater 1.34kw

Fan/motor of blower: Sirocco fan/Condenser motor: 10W

Cable port: Inner diameter: 30mm (right surface of the unit)

Exhaust opening: Inner diameter: 30mm (top surface of the unit)

Inner diameter: 30mm (back surface of the unit)

Intake opening Inner diameter: 30mm (right surface of the unit)

Temperature control system: PID control by micro computer (VI CR3 type)

Temperature setting system: Digital setting by up/down keys

Temperature display system: Digital display by orange LED

Other indications: Fluorescent character display of function

Timer display range: 0min to 99h59min, 100 to 999.5h

Operation mode: Fixed temperature operation, Auto start operation, Auto stop operation, Program operation (max. of 32 steps, repeat operation)

Additional functions: Timer, Clock, Total operating hours counter (max. of 49999h), Fan, Calibration offset

Temperature sensor: K-thermocouple for the temperature control device and the overheating prevention device

Internal dimensions (W×D×H mm): 600×500×500

External dimensions (W×D×H mm): 730×696×910