
Máy đo độ dày chính xác Elcometer PTG8BDL-TXC (0.15mm~25.40mm, IP54, ghi dữ liệu, bluetooth, B-scan)
Hãng sản xuất: ELCOMETER Model: PTG8BDL-TXC - Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0932.160.940
Chống bụi chống nước: IP54
Chế độ đo: Echo-Echo (E-E), Interface Echo (I-E), Plastic Mode (PLAS)
Tần số đo: 4, 8, 16Hz
Dải đo độ dày: E-E 0.15 - 10.15mm, I-E 1.65 - 25.40mm, PLAS 0.15 - 5.00mm
Độ chính xác: ±1% hoặc ±0.015mm
Đơn vị đo: mm hoặc inch
Thiết lập độ phân giải đọc:
+ Lo; ie 0.1mm, 0.01 Inch, 10m/s, hoặc 0.001 in/μs
+ Hi; i.e. 0.01mm, 0.001 Inch, 1m/s, hoặc 0.0001 in/μs
Hiệu chuẩn tùy chọn: 1 điểm, 2 điểm, chọn vật liệu (39 vật liệu có), thiết lập hệ số chuyển đổi, vận tốc âm thanh
Ghi dữ liệu: 10000 reading, 1000 batches
Đầu ra dữ liệu: USB, Bluetooth, phần mềm elcomaster
Kiểu pin: 2 pin AA
Thời lượng pin: Alkaline: 15 hours, Lithium: 28 hours
Nhiệt độ hoạt động: -10 đến 50°C
Kích thước: 145x73x37mm
Trọng lượng (bao gồm cả pin): 210 g
Danh mục đóng gói: Máy chính PTG8BDL, đầu dò phần tử đơn góc phải 15MHz 1/4 ich, chất tiếp âm, dây đeo, 3 màn bảo vệ, hộp bảo vệ, hộp nhựa, 2 pin AA, chứng nhận hiệu chuẩn, hướng dẫn sử dụng
PTG8 Precision Thickness Gauge
The PTG8 is the top of the range gauge with all the features and functionality necessary for measuring, with precision, material thickness on virtually any material.
With a user definable display, users can choose to view readings, statistical information, bar graph together with the highest (Hi); lowest (Lo); and average (x); reading or a run chart; a trend graph of the last 20 readings.
Measurement Mode
In Scan Mode, readings can be taken at a rate of 16Hz (16 readings per second) over a large surface area. When the transducer is lifted off the surface, the average, lowest and highest thickness values are displayed.
Calibration Options
The PTG8 allows users to store into memory up to three calibrations. Once saved the user can select a calibration without the need to re-calibrate the gauge, ideal for users who are measuring a variety of materials or thicknesses.
Using the gauge alpha-numeric function, calibration memories can be re-named to suit the calibration setting.
Display Modes
The PTG8 has user definable upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch. If a measurement is taken which falls outside set limits, the reading value and the limit icon turns red, the red LED flashes and the alarm beeps.
The PTG8 has Differential Mode; once a user defined nominal thickness value is set, the gauge displays the measured thickness together with the variation from the set nominal value thus indicating areas of the material which are thinner or thicker than expected.
The PTG8 offers B-Scan, a time based, cross sectional 2 dimentional graphical view of the material under test, ideal for relative depth analysis. The zoom of the B-Scan reading can either be set to automatic or can be defined by the user to focus on areas of interest.
Data Logging
The PTG8 can store 100,000 readings in up to 1,000 sequential or grid type batches. Using grid batching, readings are stored in a spreadsheet type format. The Obst feature, allows the user to record an obstruction within the grid.
Data Output
Compatible with ElcoMaster®, PC & Mobile Apps, readings can be downloaded via USB or Bluetooth® to PC, iOS or Android™ devices for further analysis and reporting.
|
Features:
|
Part Number (with Transducer)1 |
PTG8BDL-TXC |
Part Number (gauge only) |
PTG8BDL |
Easy to use menu structure in multiple languages |
■ |
Tough, impact, waterproof and dust resistant equivalent to IP54 |
■ |
Bright colour screen with permanent backlight |
■ |
Ambient light sensor, with adjustable brightness |
■ |
Scratch and solvent resistant display; 2.4" (6cm) TFT |
■ |
Large positive feedback buttons |
■ |
USB power supply via PC |
■ |
Gauge software updates2 via ElcoMaster® Software |
■ |
2 year gauge warranty3 |
■ |
Limits: 40 definable audible & visual pass/fail warnings |
■ |
Measurement Mode |
|
Echo-Echo (E-E) |
■ |
Interface Echo (I-E) |
■ |
Plastic Mode (PLAS) |
■ |
Measurement Rate |
4, 8, 16Hz4 |
Thickness Range5 |
|
E-E 0.15 - 10.15mm (0.006-0.400") |
■ |
I-E 1.65 - 25.40mm (0.065-1.000") |
■ |
PLAS 0.15 - 5.00mm (0.006-0.197") |
■ |
Measurement Accuracy6 |
±1% or ±0.015mm (0.0006") |
Measurement Units |
mm or inches |
Repeatability / Stability Indicator |
■ |
Display Mode: |
|
Reading |
■ |
Selected statistics |
■ |
Scan thickness bar graph |
■ |
Run Chart |
■ |
Readings and Differential |
■ |
B-Scan cross sectional display |
■ |
Selectable Reading Resolution |
|
Lo; ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs |
■ |
Hi; i.e. 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs |
■ |
Statistics |
|
Number of readings,n; Mean average, x; Standard deviation, σ. |
■ |
Lowest reading, Lo; Highest reading, Hi |
■ |
Low high limit value |
■ |
Reading Range Value |
■ |
Nominal Value |
■ |
Number of readings below low limit |
■ |
Number of readings above high limit |
■ |
Calibration Option |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch