Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Flow medium: Please note that XFM Mass Flow Meters are designed to work only with clean gases.Never try to measure flow rates of liquids with any XFM
Calibrations: Performed at standard conditions [14.7 psia (101.4 kPa) and 70 °F (21.1 °C)] unless otherwise requested
Environmental (per IEC 664): Installation Level II; Pollution Degree II
Flow accuracy: ±1% of FS at calibration temperature and pressure
Repeatability: ±0.15% of full scale
Flow temperature coefficient: 0.15% of full scale/ °C or better
Flow pressure coefficient: 0.01% of full scale/psi (6.895 kPa) or better
Flow response time: 600ms time constant; approximately 2 seconds to within ±2% of set flow rate for 25% to 100% of full scale flow
Maximum gas pressure: 500 psig
Gas and ambient temp: 32 °F to 122 °F (0 °C to 50 °C). 14 °F to 122 °F (-10 °C to 50 °C) - Dry gases only
Relative gas humidity: Up to 70%
Connections: 1/2" compression fittings
CE compliance: EMC compliance with 89/336/EEC as amended. Emission Standard: EN 55011:1991, Group 1, Class A Immunity Standard: EN 55082-1:1992
