Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
- Temperature Range: 350 ~ 2000°C (662 ~ 3632°F)
- Emissivity Adjustment: 0.100 ~ 1.000 digital on both channels when in standard mode
- Transmittance Adjustment: 0.100 ~ 1.000 digital on both channels when in standard mode
- Alpha Adjustment: Pulsar 4 Advanced: 0.050 ~ 1.000 aLP when in FMA mode on GT channel (when in FMA mode)
- Measurement Uncertainty (ε = 1, t90 = 1 s, Tamb. = 25°C): ±0.3% of reading or 3°C + 1 digit, whatever is greater
- Repeatability (ε = 1, t90 = 1 s, Tamb. = 25°C): 0.1% of full scale span
- Response Time t90: Programmable from 0.05 ~ 120 sec. When FMA mode is on: 0.5 ~ 120 sec
- Focusing Range: 500 mm to infinity
- Distance Ratio (Target Size): 160:1 Standard resolution, (distance/target size)
Electrical
- Power Supply:
24 V (18 ~ 30 VDC), 0.2 A maximum; 3.5 A with heater
115 VAC ±10%, 47 ~ 63 Hz; 230 VAC ±10%, 47 ~ 63 Hz
- Power Consumption: Max 90 W (with heater)
- Fusing: (F1) 1.6A, 'T' Time-Lag 5x20 mm; (F2) 1.25A, 'T' Time-Lag 5x20mm; (F3) 1A,'T' Time-Lag 5x20 mm
- Load: 0 ~ 600 Ω (mA output); 230 ~ 600 Ω (mA output with HART)
Environmental:
- Ambient Temperature Limits: -40 ~ 60°C
- Torque Spec, Lid Bolts: 5.5 nm
- Air:
View port purge: 1.4 bar min, 1.7 m3/h (@ standard conditions)
Combustion purge: 1.4 bar min, 17 m3/h (@ standard conditions)
Communication:
- Analog Output: 2 analog outputs 4 ~ 20 mA, linear, Outputs can be assigned to RT, GT or FF Corresponding to NAMUR NE43
- Digital Interface: RS485 addressable (half-duplex) Baud rate: 1.2 ~ 115.2 kBd
HART Rev. 7 interface
- Relay Alarm: 30 VDC / 1A max; Resistive
- Ordering information: Please check below PN
