Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Compatible lamps: T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage: Approximately 3 kV / 280 kHz
Field strength: Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length: 48"
Filament test: T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection: AC 90 V to AC 600 V, 50/60 Hz
CAT II 300 V, CAT I 600 V
Non-contact voltage sensitivity with probe tip (typical):
LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac
LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof 36"
Operating time: One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement
Operating temperature: -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature: -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude: Up to 2000 meters
Battery: One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life: Up to 500 tests (Alkaline typically)
Dimensions (L x W x H): Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight: Approximately 80 g (0.18 lb) with battery installed, excluding 48" antenna
Safety compliance: IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
