Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Capacity x Resolution (grams)252 x 0.0001 g
Counting Mode
Min. Unit Mass0.1 mg
Counting Mode
# of Samples10, 25, 50 or 100 pieces
Percent Mode
Min. 100% Ref. Mass10.0 mg
Percent Mode
Min. 100% Display0.01%, 0.1%, 1%
(depends on the
reference mass stored)
Repeatability (Std. Deviation)0-200g x 0.1 mg
200-252g x 0.1 mg
Linearity± 0.3 mg
Stabilization Time
(typically set at FAST)Approximately 2 seconds
Sensitivity Drift
(10°C to 30°C)± 2 ppm / °C
Sensing MethodCompact Super Hybrid Sensor (SHS)
Motorized Internal CalibrationNO - only the HR-AZ Series offers this feature
Clock and calendar functionNO - only the HR-AZ Series offers this feature. Date and time is required for GLP compliance. So if you are GLP then you must buy the HR-250AZ
Breeze BreakLarge Breeze Break 7.9" high (breeze break detaches in seconds making cleaning easier and enables top-loading operation.)
Operating Temperature5°C to 40°C (41°F to 104°F), 85% RH or less (No condensation)
Display TypeReverse back-lit display
Display Refresh Rate5 times / second or 10 times / second
Std. Serial InterfaceRS-232C Interface
Weighing Pan (diameter)3.5" / 90 mm
External Calibration (Not included)
250 grams
200 grams
100 grams
50 grams
AC Adaptor120V AC Adapter Included. This balance runs on AC Adapter only, will NOT run on standard off the shelf alkaline batteries.
Power ConsumptionApproximately 11 VA
(supplied to the AC Adaptor)
External Dimensions
WxDxH7.8" x 11.6" x 12.4"
198 mm x 294 mm x 315 mm
Net WeightApproximately 9 lbs
