Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Generator (Receiver Test)
Port Protection Limit: 5 W for 30 seconds
Frequency Range: 1 MHz to 1 GHz (100 kHz to 1 GHz usable); Optional to 3 GHz
Extended Frequency Range (Optional): 1 MHz to 3 GHz (100 kHz to 3 GHz usable)
Frequency Resolution: 1 Hz
Output Level Generate Port
Range FM: +5 dBm to -95 dBm below 2 GHz; -5 dBm to -95 dBm above 2
GHz (Both to -125dBm with extended gen out range option)
Range AM: -1 dBm to -95 dBm below 2 GHz; -11 dBm to -95 dBm above 2
GHz (Both to -125dBm with extended gen out range option)
Resolution: 0.1 dB
Accuracy: ±2 dB
Output Level RF I/O Port
Range FM: -30 dBm to -130 dBm below 2 GHz; -40 dBm to -130 dBm above 2 GHz
Range AM: -36 dBm to -130 dBm below 2 GHz; -46 dBm to -130 dBm above 2 GHz
Resolution: 0.1 dB
Accuracy: ±1 dB to 1 GHz ; ±2 dB > 1 GHz
Spectral Purity
Harmonic Spurious: -20 dBc max
Non-Harmonic Spurious: -35 dBc max; <-25dBc at mixing product frequencies (3227MHz - Carrier) (-30dBc typ); 10MHz Harmonics <-124 dBm (RF I/O)
Residual FM: 4 Hz, 300 Hz to 3 kHz (<1 GHz); 5 Hz, 300 Hz to 3 kHz (> 1 GHz)
Residual AM: 1.0% max, 300 Hz to 3 kHz
SSB Phase Noise (20 kHz Offset): -95 dBc/Hz max below 1 GHz (15° to 35° C); -93 dBc/Hz max all frequencies (0° to 50° C)
Receiver (Transmitter Test)
Frequency Range: 1 MHz to 1 GHz (100 kHz to 1 GHz useable);
Optional to 3 GHz Sensitivity
Narrowband FM: 2.0 uV for 10 dB EIA SINAD
Wideband FM: 10 uV for 10 dB EIA SINAD
AM: 10 uV for 10 dB EIA SINAD RF I/O Port
VSWR: < 1.2 to 2 GHz, ˜ 1.5 to 3 GHz
Max Power:
50 W for 5 minutes
150 W for 30 seconds (30 sec. on, 5 min. off)
Absolute Max Power: 150 W
Alarm: Internal temperature alarm
Spectrum Analyzer
Sweep
Frequency Range: 1 MHz to 1 GHz (250 kHz to 1 GHz typical); Optional to 3 GHz
Frequency Resolution: 1 Hz
Span Accuracy: 5%
Update Rate: ~10 times per second (depending on span)
Oscilloscope
Vertical Input
Input Impedance: 1 Meg Ohm / 600 Ohm (Selectable)
Range: ±100 VDC, ±70 Vrms AC
Accuracy: 5% of full scale
Bandwidth: 0 to 50 kHz
Horizontal Sweep: Range: 20 uSec to 1 Sec / div. (Selectable)
Trigger Selection: Normal, Auto (Free Running), Single Sweep and Freeze
Special Functions: Markers: Absolute Voltage, Delta Voltage, Delta Frequency and Delta Period
*For detailed specifications, please refer to the datasheet.
