Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Range: 0.001 Hz to 6 GHz
Resolution: 10 digits
Time Base Stability: ±1 ppm
Frequency: √
Period: √
Totalize: √
Noise Filter: √
Battery Power: 24 Hours
Remote Interface: USB (VCOM)
Input A
Input coupling: AC or DC
Input impedance: 1 MΩ or 50 Ω
Attenuation: 1x or 5x
Active edge: Rising or falling, or width high or low
Low pass: filter Filter in (~50 kHz cut-off) or Out
Trigger threshold
DC coupled: 0 to 2 V (1:1 attenuation) or 0 to 10 V (5:1 attenuation)
AC coupled: Average ± 50 mV (1:1 attenuation) or ±250 mV (5:1 attenuation)
Frequency range
< 0.001Hz to >125MHz (1MΩ, DC coupled)
< 30Hz to > 125MHz (1MΩ, AC coupled)
< 500kHz to > 125MHz (50Ω, AC coupled)
Sensitivity (sinewave): 15 mVrms 30 Hz to 100 MHz, 25 mV to 125 MHz at optimum threshold adjustment
Signal Range:
1MΩ: DC - 0 to 3.3V (1:1) or 1 to 12V (5:1); AC - up to 1Vrms (3Vpp) (1:1) or up to 4Vrms (12Vpp) (5:1)
50Ω: AC - up to 1V rms above 300kHz
Input B
Input impedance: 50 Ω nominal (AC coupled)
Frequency range: < 80 MHz to > 3 GHz
Sensitivity (sinewave): 12 mVrms 80 MHz to 2 GHz, 25 mVrms to 2.5 GHz, 50 mVrms to 3 GHz
Input signal range: < 0 dBm recommended, + 13 dBm (1 Vrms) maximum
Input C
Input impedance: 50 Ω nominal (Ac coupled) in-band. 250 k Ω at DC
Frequency range: 2 GHz to 6 GHz (typically 1.8 GHz to 7.5 GHz)
Sensitivity: 25 mVrms (-19 dBm) 2 GHz to 6 GHz
Maximum input signal: < + 16 dBm (1.5 Vrms); damage level + 25 dBm
External Reference Input
Input impedance: > 100 kΩ, AC coupled
Frequency: 10 MHz
Signal level: TTL, 3 Vpp to 5 Vpp CMOS or 1 to 2 Vrms sinewave
Timebase
Measurement clock: 50 MHz
Internal reference: 10 MHz TCXO with electronic calibration adjustment (> ± 8 ppm)
Temperature stability: Better than ± 1 ppm over rated temperature range
Initial error: < ± 0.2 ppm at 21 °C
Aging rate: < ± 1 ppm first year
General
Interface: USB (VCOM)
Display: No. of Digits: 10 digits, Size: 0.5 in (12.5 mm)
Battery: 2500 mAh NiMH cells (x3), Last 24 hours per full charge (typical), Recharge > 4 hours
AC Adapter: 85 to 240 V, 50 or 60 Hz
Power Consumption: 5W max at DC input to unit; 15VA max at AC adapter input (charging)
Operating Range: +5°C to +40°C, 20% to 80% RH
Electrical safety: Complies with EN61010-1
EMC: Complies with EN61326
Weight: 2.1 lbs (950 g) plus 0.4 lbs (170 g) AC adapter
Dimensions (W x H x D): 10.2 in x 3.5 in x 9.3 in (260 x 88 x 235 mm)
