Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Scope of measurement : 0~40.00%vol H2O
Sensors: Ion Current Humidity Sensor
Accuracy: ±2%FS (Accuracy only applies to communication output,analog signal may have additional errors due to signal acquisition
Repeatability: ±1%FS
Stability: ±1%FS/7d
Response time: After full preheating,T90 is less than 60s
Background gases: N2,He,Ar and other inert gases shall not contain Si,Pb,hydrocarbons,etc.
Explosion-proof level of chassis: Exd || CT6
Chassis protection level: IP65
Sensor life: More than 2 years (normal use)
Analyzer life: More than 5 years (normal use)
Weight: The net weight of the probe is about 10.3 kg (1 meter probe).The probe increases or decreases by about 1 kg for every 0.4 meter increase or decrease in weight.
Probe insertion depth: 500mm,1000mm,1200mm,1500mm or other dimensions customized
Power supply: 24VDC
Power consumption of analyzer: High temperature type:less than 20VA,low temperature type:less than 60VA
Calibration cycle: It is recommended to calibrate every other year.
The measured Environmental temperature: High temperature type:180-500°C low temperature type: below 180°C. Environmental Temperature of Electrical. Module:-10~+50°C
Storage environment: Temperature:-20~+60°C, Humidity:Less than 90% RH
Sample pressure: Atmospheric pressure±10%(only during ventilation)
Sample flow rate: 800-1000ml/min (limited to ventilation)
Communication: RS485/RS232(can be switched by software). Modbus RTU Protocol
Switching signal: Alarm value:1; Relay output:2 groups (1 group concentration alarm,1 group status alarm) relay contact capacity 24VDC 0.2A
Analog signal: Quantity:2 groups; Output mode:4-20mA/0-20mA/0-1V/0-5V/ 0-10V/1-5V,switchable output mode. Load:less than 500Ω
