Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Testing principle: Water Measurement by Electrolysis
Measurement range: 0-500 ppm H2O
Accuracy: Measured value (+5%),minimum 0.4 ppm
Reproducibility: +2% (10.0 ppm)
Stability: +1% FS/7d
Response time of humidity measurement: <1 second
Recovery time: T50<2 min
Measuring method: on-line
Calibration cycle: one year (recommendation)
Display: 128 *64 LCD
Key: Four keys (touch keys)
Power supply: 85-264VAC, 50/60Hz
Analysis system power consumption: less than 20VA
Communication: RS485
Alarm: Alarm output:a set of switching signals. Relay contact capacity:24VDC,0.2A
Analog output signal: 1group,4-20mA/0-20mA/0-1V/0-5V/0-10V/1-5V, freely set mode. Load: less than 500Ω
Environmental temperature: +5~+45°C Environmental humidity:less than 80%RH
Gas source pressure: 0.2-0.5 MPa
Sample gas test pressure: Maximum 0.1 MPa when flowing through the sensor (first through the pressure regulating valve to reduce pressure)
Sample gas flow rate: 300-400 ml/min
Bypass flow: 1.5-2L/min (for accelerating gas replacement, adjustable as needed)
Sensor life: more than 2 years (normal use)
Analysis system life: more than 5 years (normal use)
Analysis system weight: net weight about 16.5 kg
Cabinet size: L*W*H=400 mm*300 mm*200 mm (excluding mounting brackets and joints,etc.)
Installation hole size: L*W=260mm*426mm (4*Φ9 bolt hole)
