Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Overall Dimensions: The controller has dimensions of 79mm x 35mm, with a panel cut-out size of 71mm x 29mm.
Installation Depth: 50mm, including the length of the connecting wires.
Rear Section: The rear body length of the device is 77mm, with an additional 6.5mm for the connecting wire.
Structure: The device is suitable for panel mounting through precisely dimensioned holes.
Setup Mode: To enter the programming setup mode, press and hold the "SET" button for 5 seconds.
Users can select the following settings:
Sensor type (CoL or HEt)
Temperature deviation (dIF): Adjustable from 0.1 to 19.9°C.
Output delay time (dLt): Adjustable from 0.00 to 9.59 seconds.
Temperature calibration (Cor): Adjustable range from -5.0°C to +5.0°C.
Function lock (Loc): Lock changes with ON or OFF option.
Display: The screen shows the current temperature.
Temperature Setting: Press the "SET" button. When the temperature value blinks, use the up/down arrow keys to adjust to the desired value, then press "SET" to save.
Confirmation: After completing the setup, the symbol "o-t" will appear to confirm that the settings have been successfully applied.