Doble-Megger DLRO10 Digital Microhmmeter (1.9999 mΩ~1999.9 Ω)
Resistance ranges
Full Scale: 1.9999 mΩ~1999.9 Ω
Resolution: 0.1 μΩ~100 mΩ
Measurement mode: Manual, Auto, Continuous, Inductive
Measurement control: Fully Automatic
Measurement speed: <3s for forward and reverse current and to display average
Display Measurement: 4 1/2 digit seven segment LED
Range and safety: DLRO10 LED indications
Test method: Single cycle reversing DC ratiometric measurement - average result display.
Test current accuracy: ±10%
Test current stability: <10 ppm per second
Lead resistance: Maximum 100 mΩ total for 10 A operation irrespective of battery condition.
Voltmeter input impedance: >200 kΩ
Noise rejection: Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads.
Warning will show if hum or noise exceeds this level.
Battery type: 5.2 lithium ion rechargeable
Battery life: Typical 1300 x 10 A tests before recharge
Battery charge time : Via external 90 V – 260 V 50/60 Hz charger from 12 to 15 V DC supply
Standard: 2.5 hours to 90% capacity, 4 hours to fully charged
Slow Charge: +10 °C to + 45 °C (50 °F to 113 °F)
Operating temperature range and humidity:
+5 °C to +45 °C (41 °F to 113 °F) at full accuracy
-10 °C to +50 °C (14 °F to 122 °F) at reduced accuracy
<90% RH @ 40 °C (104 °F) non-condensing
Storage temperature range and humidity
-30 °C to +70 °C (50 °F to 113 °F)
<90% RH @ 40 °C (104 °F) non-condensing
Temperature co-efficient: <0.01% per °C, over range 5 °C to 40 °C (<0.0006% per °F from 41 °F to 104 °F)
Maximum altitude: 2000m (6562 ft) to full safety specifications
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

