Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

- Conductivity
Range:
... to 1.999 µS/cm ; ... to 19.99 µS/cm ;
... to 199.9 µS/cm ; ... to 1999 µS/cm ;
... to 5000 µS/cm ; ... to 19.99 mS/cm ;
... to 199.9 mS/cm
Resolution:
0.001 µS/cm ; 0.01 µS/cm ;
0.1 µS/cm ; 1 µS/cm ;
5 µS/cm ; 0.01 mS/cm ;
0.1 mS/cm
Accuracy: ±1 % of full scale reading (±2 % >500 mS/cm)
Cell Constant: 0.01 ; 0.1 ; 1 ; 10
- Temperature
Range: -9.9 to 125 ºC
Resolution: 0.1 ºC
Accuracy: ±0.5 ºC
Sensor: Pt100 / Pt1000 (jumper selectable)
Compensation: Auto/manual (normalized at 25 ºC)
Coefficient: Ultrapure water or linear 0.00 to 10.00 %
- Set Point And Controller Functions
Set Point 1 (SP1)/ Set Point 2 (SP2):
... to 1.999 µS/cm or ... to 19.99 µS/cm or
... to 199.9 µS/cm or ... to 5000 µS/cm or
... to 19.99 mS/cm or ... to 199.9 mS/cm
Switching Conductivity Hysteresis: 0 to 10 % of full scale
Function (Switchable): P control (pulse length/pulse frequency); limit control
Adjustable Period With Pulse Length Controller: 0.5 to 20 sec
Adjustable Period With Pulse Frequency Controller: 60 to 120 pulse/min
Pickup/Dropout Delay: 0 to 2000 sec
Contact Outputs: 3 SPST relay
Switching Voltage/ Current/Power: Max. 250 VAC / max. 3 A / max. 600 VA
- Alarm Functions
Function (Switchable): Steady or fleet (pulse)
Wash Cycle: 0.1 to 199.9 hr
Wash Duration: 1 to 1999 sec
Pickup Delay: 0 to 2000 sec
Switching Voltage/Current/Power: Max. 250 VAC / max. 3 A / max. 600 VA
- Electrical Data And Connections
Transmitter Function: Two 0/4 to 20 mA scalable outputs for pH/ORP and temperature, galvanically isolated
CU 22 Function: 22 mA current output
Isolated Output Voltage: 12 V ±0.5 V (max. 50 mA)
Hold Function Switch: To freeze output current and deactivate control relays
Load: Max. 600 Ohm
Conductivity Input: 2-pin terminal
Connection Terminal: 5-pole, 17-pole terminal, detachable blocks
Power Supply
Input: 220 VAC (jumper selectable) ; 48 to 62 Hz ; max. 7 VA
Main Fuse: Slow-blow 250 V / 100 mA
Pollution Degree: 2
Operating Temperature Range: -10 to 50 ºC
Max. Relative Humidity: 80 % up to 31 ºC decreasing linearly to 50 % at 40 ºC
- Dimensions (WxHxD): 96 x 96 x 175 mm
Weight: 700 g (unit) / 800 g (packed)
Ingress Protection: IP54 (front panel)
Include: terminal blocks, gasket, threaded rods, catch, etc




