Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Includes:
Fluke 2052R Advanced Wire Tracer Receiver
Fluke 2000T Advanced Wire Tracer Transmitter
i400 AC Current Clamp
Fluke 2000ACC Test Lead Accessory Kit for 2052/2062
Premium hard carrying case
Batteries
Quick reference guide
2052R Receiver
Measurement category: CAT IV 600 V
Operating voltage: 600 V AC/DC
Operating frequency: Energized: 6.25 kHz; De-Energized: 32.768 kHz
Signal indications: Numeric, bar graph display and audible beep
Response time: Tip Sensor (Energized/De-Energized): 500 ms; NCV: 500 ms; Battery monitoring: 5 s
Range detection (open air)
+ Tip Sensor: Energized
Max distance via air: up to 6.1 m (20 ft)
Pinpointing: approx. 5 cm (1.97 in)
+ Tip Sensor: De-Energized
Max distance via air: up to 4.5 m (14.7 ft)
Pinpointing: approx. 5 cm (1.97 in)
+ NCV (40 Hz to 400 Hz)
Max. sensitivity: 90 V up to 2 m
Min. sensitivity: 600 V up to 1 cm
2000T Transmitter
Measurement category: CAT IV 600 V
Operating voltage: 600 V AC/DC
Operating frequency: Energized/Loop: 6.25 kHz; De-Energized: 32.768 kHz
Signal indications: LEDs and audible beep
Response time: Line voltage monitoring: 1 s; Battery voltage monitoring: 5 s
Current output of signal (typical): Energized circuit:
+ Energized circuit:
High mode: 60 mA rms
Low mode: 30 mA rms
+ De-energized circuit:
High mode: 110 mA rms
Low mode: 40 mA rms
Loop mode with test leads: 160 mA rms
Loop mode with i400 AC Current Clamp: 385 mA rms
Signal voltage output (nominal):
+ Energized circuit:
High mode: 14 W @ 230 V ac/50 Hz, 3.33 kΩ @ 230 V ac
Low mode: 4.6 W @ 230 V ac/50 Hz, 11.5 kΩ @ 230 V ac
+ De-energized circuit:
High mode: 31 V RMS, 140 Vp-p, 0.86 W @ 1 kΩ load
Low mode: 27.5 V RMS, 120 Vp-p, 0.1 W @ 1 kΩ load
Loop mode with test leads: 32 V RMS, 140 Vp-p, 0.87 W @ 1 kΩ load
Loop mode with i400 AC Current Clamp: 31 mV, 0.89 W @ 1 Ω load
i400 AC Current Clamp
Measurement category: CAT IV 600 V, CAT III 1000 V
Operating voltage: 1000 V AC
Current range: 400 A
Basic accuracy: 2 % + 0.06 A (45 Hz to 400 Hz)
Mechanical: 2000ACC Test Lead Accessory Kit
Includes:
2x 1 m test leads (red, black),
1x 7 m test lead (green),
2x test probes (black),
2x alligator clips (red, black),
2x outlet blade adapters (red, black),
2x outlet round adapters (red, black)
Measurement category: CAT IV 600 V (test leads), CAT II 1000 V (test probes), CAT IV 600 V (alligator clips), CAT II 300 V (outlet adapters)
Operating voltage and current:
600 V, 10 A max. (red/black leads), 600 V, 10 A max. (green lead), 1000 V, 8 A max. (black probe)
600 V, 10 A max. (alligator clips), 300 V, 10 A max. (outlet adapters)
Operating temperature: 0 °C to 50 °C (32 °F to 122 °F)
Operating humidity:
10 °C to <30 °C (95 %: 50 °F to <86 °F), 30 °C to <40 °C (75 %: 86 °F to <104 °F),
40 °C to <50 °C (45 %: 104 °F to <122 °F)
Storage temperature and humidity: 0 °C to 60 °C (32 °F to 140 °F),
Operating altitude: 2000 m (6561 ft)
Pollution degree: 2
Water and dust resistance: IP 20
Drop proof: 1 m (3.28 ft)
Key features
Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
Find breaks or opens and shorts, and identify breakers and fuses easily
CAT IV 600 V safety rated
Includes the i400 AC Current Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Manual
Datasheet
