FUZRR ES7060 Intelligent Live Cable Identification Instrument

Transmitter technical specification

Function: Outputs composite pulse width frequency signal, signal coupling output, signal direct connection output, displays output voltage, output current, loop impedance, remaining battery voltage, and dynamic indication of launch status

Power supply: 9.6V/6Ah lithium battery, fully charged, continuous working for about 8 hours (at 3rd gear output)

Output method: Automatic identification, caliper coupling when powered on; direct output when power off

Frequency: 6 adjustable: 640Hz, 1.28KHz, 2.56KHz, 3.84KHz, 6.50KHz, 8.05KHz

Output interface: Waterproof aviation socket

Output power: Maximum 15W, 5 levels adjustable, automatic real-time impedance matching

Human-computer interaction: Physical buttons, capacitive screen touch, gesture recognition

Automatic shut-down: It will automatically shut down after 30 minutes of no operation or output. The time can be set.

Automatic standby: Yes, by default, the screen brightness will be automatically reduced after 5 minutes of inactivity to save power. The time can be set.

External voltage detection: Yes, up to 150V

Charging interface: Round charging interface, DC logo

Charger: 11 V/2A DC charger

Fixture update: Yes, update via USB

Transmitter size: 275mm × 226mm × 150mm

LCD size: Length and width 120 mm × 70 mm; display area 110 mm × 62 mm

Weight: The transmitter is about 2.28 kg; the transmitter clamp is about 1.12 m; the direct-connect test clamp is about 170g, and the total mass is about 4.44kg

Pressure resistant: AC 3,700V/rms (in front of the top and bottom of the instrument box)

Electromagnetic properties: IEC61326(EMC)

Reference safety regulations: IEC61010-1 (CAT III 300V, CAT IV 150V, pollution level 2)

IP: IP45

Receiver technical specification

Function: Live cable identification, power outage cable identification, single-core cable identification, with FHD algorithm

Power supply: 8.4V/2,500mAh Rechargeable lithium battery, USB charging interface, full power continuous operation for about 6 hours

Receive frequency: 6 types: 640Hz, 1.28KHz, 2.56KHz, 3.84KHz, 6.50KHz, 8.05KHz

Gain: 5th gear

Unique identification: Yes, the target cable display ( √ )

Filter mode: Hardware filtering + DSP digital filtering

FHD algorithm: Support, instrument direct results, greatly reduce the use requirements of field personnel

Calibration quantity: Number of calibratable cables: 1~20

Identification condition: Current: the current percentage of the received signal and the transmitted signal is between the calibration value 70%-130%, which is one of the conditions for successful identification.

Signal encoding: the receiver decodes and identifies it through an algorithm, and consistency with the transmitter output encoding is one of the conditions for successful identification.

Signal phase: the receiver extracts the phase through an algorithm, and the comparison with the calibration value < 50° is one of the conditions for successful identification.

Current direction: the receiver determines the direction of the current signal, and if it is consistent with the calibration value, it is one of the components of successful identification.

Display mode: 3.5-inch true color LCD screen display, color icon indication

Receiver size: 172mm × 106mm × 42mm

Flexible current clamp: Internal diameter: φ200mm Signal line length: 3 m

Examination range: Power outage identification: The coil can detect a composite pulse width frequency signal with a loop resistance of 0Ω ~ 30kΩ; it can generally reach a cable length of more than 20 kilometers, which is mainly determined by the cable grounding resistance and cable resistance.

Live identification: The coil can detect pulse signals with a loop resistance of 0Ω to 200Ω; when the detection loop resistance is 200Ω, the cable length can generally be 0-10 kilometers.

Signal sampling rate: Adaptation for different frequency sampling rates, Max 819.2KHz

Result display period: About 2 times/second

Automatic shut-down: 30 minutes of no operation and or input, the meter automatically shuts down to save power. When the battery level is too low, the instrument will be shut down.

Charger: 5V Charger

Receiver quality: Flexible current clamp 112g; Receiver 405g (with battery)

Withstand voltage: AC2,000V/rms (Before the front and rear ends of the enclosure)

Manual