FUZRR FR100R Series Rogowski Coil Current Sensor (0 A ~ 10 kA)

Coil Diameter: φ 8 mm

Range: 0 A ~ 10 kA

Output: 100 mV / 1 kA (optional integrator can be customized for other output parameters)

Resolution: 0.1 A

Accuracy Class: ±1.0% FS (50 Hz / 60 Hz; 23 °C ± 2 °C, below 70% RH, wire centered in coil)

Phase Error: ≤ 1° (50 Hz / 60 Hz; 23 °C ± 2 °C)

Initial Phase: 90°

Response Frequency: 0.1 Hz ~ 10 MHz

Electric Field Disturbance: No hysteresis effect, no external electric field interference

Wire Position: Lead under test centered in coil; position error influence ≤ ±0.3% FS

Line Voltage Test: Tested on lines below AC 1000V

Design & Interface Specifications

Output Interface: BNC connector (optional audio plug, banana plug, or bare wire)

Output Cable Length: 2 m

Included Accessories: Sensor: 1 piece

Safety & Operational Environment

Operating Temperature & Humidity: -20 °C to 50 °C; below 80% RH

Storage Temperature & Humidity: -10 °C to 60 °C; below 70% RH

Dielectric Strength: AC 2000 V/rms (between both ends of the coil)

Safety Compliance Standards: IEC1010-1, IEC1010-2-032, Pollution Degree 2, CAT IV 1000V

Datasheet